Transition period:
Latest from 1 May 2014, the remains can only supply to meet the standards of vehicles.

2. Standard Scope -- DIN 5510-2:2009-05 fire test for railway component

This standard applies to vehicle, these vehicles including railway construction and operation of the provisions of (EBO), narrow-gauge railway construction and operating requirements (ESBO), magnetic levitation railway construction and operation of the provisions of (MbBO) and the tram construction and operation requirements (BOSstrab) The effective range. This standard has provided the following objectives:
- The phenomenon of combustion characteristics and burn complicated classification
- Have the necessary test methods
- To prevent fire, on the manufacture of vehicles, materials and components used in the combustion characteristics and burn complicated by the phenomenon of necessary requirements.

3. Standard Brief- DIN 5510-2:2009-05 fire test for railway component

DIN 5510-2 determination the fire classification of railway vehicle material and structure by burning buhaviour, smoke density, dropping behaviour and toxic.

4. DIN 5510-2 the main concerns:

4.1    Reaction to fire

4. 1.1.  S1 Fire testing—small switches, armrest, etc, small parts.

Test method: DIN 53438-1、DIN 53438-2、DIN 53438-3

Classification: S1

4. 1.2.  S2-S5 Fire testing—except flooring cover

Test method: Testing of materials, small components and component section for rail vehicles—Determination of burning behavior using a gas burner.

Classification: S2-S5

4. 1.3.  Flooring cover fire testing

Test method: EN ISO 9239-1 or DIN 4102-14

Classification: SF1-SF3

4. 1.4.   Seat for fire testing

Test method: DIN EN 1201-1 and DIN EN 1201-2

4. 1.5.   Electrical equipment

Test method: DIN EN ISO 4589-2 or DIN EN 60695-11-10

Classification: Oxygen index ≥28% or 30%

4. 1.6.   Cable fire testing

Test method:

EN 50266-2-5:2001: Common test methods for cable under fire condition—Test for vertical flame spread of vertically-mounted bunched wires or cables –Part 2-5: Procedures –Small cables-Category D

DIN EN 60332-1-2:2004 Tests on electric and optical fibre cables under fire conditions—Part 1-2: Test for vertical flame propagation for a single insulated wire or cable.

DIN EN 61034-2: Measurement of smoke density of cables burning under defined conditions---Part 2: Test procedure and requirement.

4.2.   Smoke development

Test method: DIN 54837

Classification: Not reached SR1，SR1、SR2

Not reached SR1: ＞100(%*min)；SR1: ≤100(%*min)；SR2: ≤50(%*min)

4.3.   Droplet

Test method: DIN 54837

Classification: Not reached ST1-ST2

4.4.   DIN 5510-2 the main concerns:

Flammability：S1-S5，SF1-SF3

Smoke development：SR1-SR2

Dropping：ST1-ST2

Smoke density and toxicity ：DIN EN 5659-2

Vertical single Cable fire testing ：DIN EN 60332-1-2

Vertical bunch Cable fire testing：DIN EN 50266-2-4 /DIN EN 50266-2-5

Smoke density of cable fire testing：DIN EN 61034-2

5. DIN 5510-2:2009 the main fire test standard:

6. Application DIN 5510-2 fire testing materials：

Rubber Product、Rubber seal

Ceiling Covering

Walling Covering

Textile、Non-woven fabrics Curtain、Curtain、Adumbral Product

Seat shell、Seat trim

Flooring Covering、PVC Flooring covering

Cable、Cable tie、Cable tube

Foam material、Sponge、Melamine Foam

Paint、Adhesive、Pigment、Varnish

FRP composite materials、SMC sheet

Braided hose、Hose protection

Window、door 、framework

Small parts

Connector、Connected equipment

pipe、corrugate pipe、Heating pipe、Cooling pipe

Other materials