ASTM F1731消防和救援人员制服及其他隔热保护服装人体测量与尺寸标注标准规范

ASTM F1731 Standard Practice for Body Measurements and Sizing of Fire and Rescue Services Uniforms and Other Thermal Hazard Protective Clothing
ASTM F1731 消防和救援人员制服及其他隔热保护服装人体测量与尺寸标注标准规范

Sizing is a critical factor that must be considered when selecting and using protective clothing. Properly sized garments add to the safety and performance of wearer by not restricting movement. A work uniform that restricts movement or exposes skin to hazardous environments will result in lost efficiency and may promote injury.
In those cases where work uniforms become an element of a multi-layered protective ensemble, it is essential that uniform fit does not restrict the wearer's movements or interfere with the fit and use of other safety related clothing and equipment.

This practice can be used for selecting the proper size and fit of work uniforms for fire and rescue personnel and personnel in other occupations where hazardous thermal exposures may exist.

1. Scope
1.1 This practice is intended to assist in size selection of work uniforms for fire and rescue services personnel and workers who may be exposed to thermal hazards. Work uniform ensembles consist of a shirt and trouser apparel combination.
1.2 This practice is applicable to uniforms for both male and female personnel.
1.3 This practice provides a standard means for measuring human body dimensions for the selection and ordering shirts and trousers.
1.4 This practice provides a means for evaluating the fit of selected uniform sizes.
1.5 This practice provides a standard list of textile and apparel terminology specific to the clothing industry which is used in determining size and fit of garments. This vocabulary will be useful in communications between buyers and sellers.
1.6 The values stated in SI units are to be regarded as standard. The inch-pound equivalents given in parentheses are for information only and may be approximate.
1.7 This standard is not intended for use in evaluating the fire resistive performance or durability of work uniforms. In addition, this practice does not provide a means to quantify the likelihood of human injuries that may be related to the fit of uniforms or protective clothing.
1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Note 1.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D123 Terminology Relating to Textiles
ASTM D5219 Terminology Relating to Body Dimensions for Apparel Sizing
ASTM F1154 Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Integrity of Chemical-Protective Suit Ensembles
AATCC Standards
AATCC158 Dimensional Changes in Dry-Cleaning in Perchloroethylene: Machine Method
NFPA Standards
NFPA1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting
Index Terms
body measurements; fire and rescue services; garments; protective clothing; sizing; thermal hazard; uniforms; Uniforms; Body dimension measurements; Flame-resistant (FR) clothing/materials; Garments; Protective clothing; Sizing; Thermal hazard;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：11/22/2013 點擊次數：1137