防火网
本站  
設為首頁 加入收藏 網站地圖  中文版 繁体 English
 
測試服務: 機車材料防火測試 | 建築產品防火測試 | 船舶防火測試 | 飛機防火測試 | 耐火測試 | 噴射火測試 | 其他測試
   
用戶名:
密碼:
驗證碼:
   
 
主要阻燃防火認證標準
火車船舶汽車建材
 
相關測試方法 更多>>
EN ISO 9239-1:2010地
EN ISO 1182:2010
NF P 92-501
NF P 92-507
法标F级测试
法标I级测试
法国M级测试
EN ISO 1182
EN ISO 9239-1
EN 13501-1
 
首頁   美国   ASTM F1788水上泄漏油现场燃烧标准导则:环境与操作依据
 

ASTM F1788水上泄漏油现场燃烧标准导则:环境与操作依据

ASTM F1788 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM F1788 水上泄漏油现场燃烧标准导则:环境与操作依据

This guide is primarily intended to aid decision-makers and spill-responders in contingency planning, spill response, and training.
This guide is not specific to either site or type of oil.

1. Scope
1.1 This guide covers the use of in-situ burning to assist in the control of oil spills on water. This guide is not applicable to in-situ burning of oil on land.
1.2 The purpose of this guide is to provide information that will enable spill responders to decide if burning will be used as part of the oil spill cleanup response.
1.3 This is a general guide only. It is assumed that conditions at the spill site have been assessed and that these conditions are suitable for the burning of oil. It is also assumed that permission to burn the oil has been obtained from appropriate regulatory authorities. Variations in the behavior of different oil types are not dealt with and may change some of the parameters noted in this guide.
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are included for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM F1990 Guide for In-Situ Burning of Spilled Oil: Ignition Devices
ASTM F2152 Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
Index Terms
fire-resistant booms; in-situ burning; oil-spill burning; oil-spill containment; oil-spill disposal; Booms; Fire-resistant booms; In-situ oil spill response/treatment; Oil spill control systems;

更多防火阻燃测试认证,请咨询中国防火网
电话:400-666-7290
网址:www.firete.com
邮箱:info@firete.com

...


 來源:防火網 發布時間:11/22/2013 點擊次數:1074

 上一條: ASTM F1731消防和救援人员制服及其他隔热保护服装人体测量与尺寸标注标准规范

 下一條: ASTM F2230水面漏油现场燃烧的标准指南:冻结条件
 
 
網站首頁 | 測試服務 | 各國標準 | 新聞資訊 | 防火材料 | 會展信息 | 認證服務 | 在線咨詢 | 聯系我們
Copyright © 2009-2023 Firete.com All Right Reserved 蘇公網安備 32010502010088號
服務熱線:+86 25-86583475   備案號:苏ICP备10201999号-1 DIN5510-2 DIN5510 防火網博客