NFPA 225按样板建造的住房装配标准

NFPA 225 MODEL MANUFACTURED HOME INSTALLATION STANDARD
NFPA 225 按样板建造的住房装配标准

1.1* Scope. This model standard shall cover the installation of manufactured homes wherever sited in the United States and its territories. The manufacturer’s installation instructions shall apply under either of the following conditions
(1) To items not covered by this standard
(2) Where the manufacturer’s approved installation instructions provide a specific method of performing a specific operation or assembly
A.1.1 Utilization of this standard by the homeowner and installation crew and use of a registered professional engineer in those unusual circumstances as required by this standard will help ensure the homeowner of a well-built, safe, and affordable home. This standard contains instructions, including specifications and procedures, for installation of utility connections of a manufactured home. It has been written in an objective manner so that it can be understood by those who are trained in the installation of manufactured homes and who are properly licensed. It discusses the installation of the home from preparation of the site through final inspection. It includes many tables and figures giving important data for proper installation.
 
Install manufactured homes for maximum safety with the 2009 NFPA 225.
The 2009 NFPA 225 Model Manufactured Home Installation Standard presents the latest guidelines for safe, efficient, and effective installation of manufactured homes. Provisions cover
·    Preparation of sites intended for manufactured homes
·    Foundations on which the manufactured homes are installed
·    Procedures for on-site installation and erection
·    Management of appliances and utility connections
·    Anchoring of the home and protection against seismic events, floods, and wind
Keep pace with these changes in the 2009 NFPA 225
·    New requirements for on-site installation of structures such as carports, awnings and roof coverings to insure such appurtenances are structurally independent from the home itself.
·    Extensive revisions to the sections dealing with the location and spacing of ground anchors were completed to allow NFPA 225 criteria to better align with the wind zone criteria of NFPA 501.
·    A new chapter dealing with prescriptive design criteria for homes that may be placed in a flood hazard area has been added. The chapter provides extensive details on pier design and spacing for such installations.
(Softbound, 66 pp., 2009)

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...
 

 來源：防火網　發布時間：12/20/2013 點擊次數：1082