ASTM E1915用燃烧红外线吸收光谱测定法分析含金属矿石和有关材料的标准试验方法

ASTM E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
ASTM E1915 用燃烧红外线吸收光谱测定法分析含金属矿石和有关材料的标准试验方法

These test methods are primarily intended to test materials for compliance with compositional specifications and for monitoring. The determination of carbon and sulfur and acid neutralization potential in ores and related materials is necessary to classify ores for metallurgical processing and to classify waste materials from the mining and processing of ores such as leach residues, waste rock, and tailings according to their potential to generate acid in the environment. This information is useful during mine development to assist in mining and mineral processing operations and for proper disposal of waste materials. These test methods are also used to speciate carbon and sulfur contents of metal-bearing ores and related materials so that acid-base accounting can be performed (that is, carbonate mineral acid neutralization potential (ANP) minus sulfide-sulfur mineral acid generation potential (AGP) = net calcium carbonate (NCC)). Additionally, the test method has utility to identify the amount of organic carbon contained in gold ores so that potential for preg robbing can be identified and rectified through established pretreatment methods prior to cyanidation. (Warning—Pyrolysis pretreatment at 550 °C has a potential to thermally decompose some carbonate minerals: (1) transition metal carbonates (for example, siderite, FeCO3, and rhodochrosite, MnCO3) decompose, yielding carbon dioxide, CO2, in the range of 220 °C to 520 °C; (2) calcite decomposes slightly between 300 °C and 500 °C, although most decomposition occurs above 550 °C; (3) dolomite decomposes at 800 °C to 900 °C (Hammack, 1994, p. 440). )
These test methods also may be used for the classification of rock to be used in construction, where the potential to generate acid under environmental conditions exists.
It is assumed that the users of these test methods will be trained analysts capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory and that proper waste disposal procedures will be followed. Appropriate quality control practices such as those described in Guide E882 must be followed.

1. Scope
1.1 These test methods cover the determination of total carbon and sulfur and acid-base characteristics in metal bearing ores and related materials such as leach residues, tailings, and waste rock within the following ranges:
1.2 The quantitative ranges for the partial decomposition test methods are dependent on the mineralogy of the samples being tested. The user of these test methods is advised to conduct an interlaboratory study in accordance with Practice E1601 on the test methods selected for use at a particular mining site, in order to establish the quantitative ranges for these test methods on a site-specific basis.

2. Referenced Documents (purchase separatel
ASTM Standards
ASTM D1067 Test Methods for Acidity or Alkalinity of Water
ASTM D1193 Specification for Reagent Water
ASTM D1976 Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy
ASTM D5673 Test Method for Elements in Water by Inductively Coupled Plasma--Mass Spectrometry
ASTM D5744 Test Method for Laboratory Weathering of Solid Materials Using a Humidity Cell
ASTM D6234 Test Method for Shake Extraction of Mining Waste by the Synthetic Precipitation Leaching Procedure
ASTM E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E50 Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
ASTM E135 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E882 Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
ASTM E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques
ASTM E1601 Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
ASTM E1950 Practice for Reporting Results from Methods of Chemical Analysis
ASTM E2242 Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure
Index Terms
acid neutralization potential; carbonate carbon content; carbon content; net calcium carbonate content; ores; organic carbon content; related materials; sulfate sulfur content; sulfide sulfur content; sulfur content; tailings; leach residue; waste rock; Carbon content--metals/alloys; Chemical analysis--metals/alloys; Combustion infrared absorption spectrometry; Metal-bearing ores; Spectrometry; Sulfur--metals/alloys; Tailings; Total carbon (TC);

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：12/2/2013 點擊次數：941