ASTM D1168电绝缘用烃类石蜡标准试验方法

ASTM D1168 Standard Test Methods for Hydrocarbon Waxes Used for Electrical Insulation
ASTM D1168 电绝缘用烃类石蜡标准试验方法

The significance and use of the individual test methods are to be found in the individual methods referenced. For significance specifically applicable to electrical insulation materials, refer to Test Methods D 176.

1. Scope
1.1 These test methods cover a compendium of tests that apply to mineral waxes of petroleum origin in general, but more specifically to the so-called microcrystalline types used as either electrical insulation or moisture-proofing mediums, or both, for treating, impregnating, coating, and filling electrical apparatus. These test methods are also applicable to other waxes of natural or synthetic origin, provided that their characteristics are similar to those of the so-called microcrystalline waxes.
Note 1—There is no equivalent ISO or IEC standard.
1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautions, see Section 5.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D6 Test Method for Loss on Heating of Oil and Asphaltic Compounds
ASTM D70 Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
ASTM D87 Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D88 Test Method for Saybolt Viscosity
ASTM D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D94 Test Methods for Saponification Number of Petroleum Products
ASTM D127 Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
ASTM D176 Test Methods for Solid Filling and Treating Compounds Used for Electrical Insulation
ASTM D445 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
ASTM D664 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D937 Test Method for Cone Penetration of Petrolatum
ASTM D938 Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
ASTM D974 Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D1321 Test Method for Needle Penetration of Petroleum Waxes
ASTM D1500 Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D1711 Terminology Relating to Electrical Insulation
ASTM D2161 Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity
ASTM E28 Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
Index Terms
acid and base number; color; density; fire point; flash point; hydrocarbon waxes; loss on heating; melting properties; mineral waxes; penetration; saponification number; softening properties; viscosity; volume changes; volume contraction; waxes; Crystallinity index; Density--petroleum products; Electrical insulating solids; Filling and treating compounds; Glycerin; Hydrocarbon waxes; Mineral waxes; Petroleum wax; Specimen preparation (for testing)--electrical insulation; Thermal expansion/contraction--electrical insulating materials; Volume changes/contraction; Waxes;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：11/26/2013 點擊次數：1259