ASTM D878绝缘油中无机氯化物和硫酸盐的标准试验方法

ASTM D878 Standard Test Method for Inorganic Chlorides and Sulfates in Insulating Oils
ASTM D878绝缘油中无机氯化物和硫酸盐的标准试验方法

The presence of inorganic chlorides and sulfates in oil in contact with metal surfaces in electrical equipment can result in corrosion of transformer components. The deterioration of metal surfaces is dependent upon the quantity of the corrosive agent and the operating environment. Although not quantitative, this test method is a means for recognizing the potential for such a hazard.

1. Scope
1.1 This test method describes the qualitative determination of inorganic chlorides and sulfates in electrical insulating oils. Note 1 - It should be pointed out that if the strong acids, hydrochloric and sulfuric, are present, they will give positive results for chlorides and sulfates, respectively.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
D1193 Specification for Reagent Water
Index Terms
chlorides; inorganic; insulating oil; sulfates;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：11/25/2013 點擊次數：1185