ASTM D822 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings ASTM D822 用经过过滤的明光碳弧曝光装置测定涂料及相关涂层的标准规范
1. Scope 1.1 This practice covers the selection of test conditions for accelerated exposure testing of coatings and related products in filtered open-flame carbon-arc devices conducted according to Practices G 151 and G 152. This practice also covers the preparation of test specimens, the test conditions suited for coatings, and the evaluation of test results. describes commonly used test conditions. Note 1 Previous versions of this practice referenced carbon-arc devices described by Practice G 23, which described very specific equipment designs. Practice G 23 has been withdrawn and replaced by Practice G 151, which describes performance criteria for all exposure devices that use laboratory light sources, and by Practice G 152, which gives requirements for exposing nonmetallic materials in filtered open flame carbon-arc devices. 1.2 This practice does not cover enclosed carbon-arc exposures of paints and related coatings, which is described in Practice D 5031. Another procedure for exposing these products is covered by Practice D 3361, in which the specimens are subjected to radiation from an unfiltered open-flame carbon arc that produces shorter wavelengths and higher levels of short wavelength radiation than filtered open-flame or enclosed carbon arcs. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. Referenced Documents (purchase separately) ASTM Standards ASTM D358 Specification for Wood to Be Used as Panels in Weathering Tests of Coatings ASTM D523 Test Method for Specular Gloss ASTM D609 Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products ASTM D610 Practice for Evaluating Degree of Rusting on Painted Steel Surfaces ASTM D659 Method of Evaluating Degree of Chalking of Exterior Paints ASTM D660 Test Method for Evaluating Degree of Checking of Exterior Paints ASTM D662 Test Method for Evaluating Degree of Erosion of Exterior Paints ASTM D714 Test Method for Evaluating Degree of Blistering of Paints ASTM D772 Test Method for Evaluating Degree of Flaking (Scaling) of Exterior Paints ASTM D823 Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels ASTM D1005 Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers ASTM D1186 Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base ASTM D1400 Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base ASTM D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials ASTM D1730 Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting ASTM D2244 Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates ASTM D2616 Test Method for Evaluation of Visual Color Difference With a Gray Scale ASTM D3361 Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings ASTM D3980 Practice for Interlaboratory Testing of Paint and Related Materials ASTM D4214 Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films ASTM D5031 Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings ASTM D5870 Practice for Calculating Property Retention Index of Plastics ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method ASTM E1347 Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry ASTM G23 Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials ASTM G113 Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials ASTM G141 Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials ASTM G147 Practice for Conditioning and Handling of Nonmetallic Materials for Natural and Artificial Weathering Tests ASTM G151 Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources ASTM G152 Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials ASTM G169 Guide for Application of Basic Statistical Methods to Weathering Tests Index Terms carbon arc; degradation; exposure; light exposure; ultraviolet ; weathering;
更多防火阻燃测试认证,请咨询中国防火网 电话:400-666-7290 网址:www.firete.com 邮箱:info@firete.com
... |