ASTM D6920用氧化燃烧及电化学探测法测定石脑油,馏出液,重整汽油,柴油,生物柴油及发动机燃料中总硫量的标准试验方法

ASTM D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection
ASTM D6920用氧化燃烧及电化学探测法测定石脑油,馏出液,重整汽油,柴油,生物柴油及发动机燃料中总硫量的标准试验方法

All sulfur present in petroleum products is converted to sulfur oxides upon combustion, which is a significant pollutant of the atmosphere. This test method can be used to monitor the total sulfur levels in these fuels.
Note 1—Virtually all sulfur compounds will be detected by this technique.

1. Scope
1.1 This test method covers the determination of total sulfur in liquid hydrocarbons, boiling in the range from approximately 25 to 400°C, with viscosities between approximately 0.2 and 10 cSt (mm/S) at room temperature. This test method is applicable to naphthas, distillates, and motor fuels such as gasolines, reformulated gasolines, gasohols, diesels and biodiesels containing approximately 1 to 100 mg/kg total sulfur in gasoline type products, and approximately 1 to 40 mg/kg sulfur in diesel type products.
1.2 The detector response for this technique within the scope of this test method is linear with sulfur concentration.
1.3 Based on interlaboratory study, the pooled limit of quantitation of this test method is 3 mg/kg for gasoline and <0.5 mg/kg for diesel samples.
1.4 This test method meets the U.S. EPA requirements for measuring sulfur in ultra low sulfur diesel fuels by the designated Test Method D 6428, as published in the U.S. Federal Register § 80.520(a)(1).
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections 8 and 9.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D4057 Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D4177 Practice for Automatic Sampling of Petroleum and Petroleum Products
ASTM D6299 Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
ASTM D6428 Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection
ASTM D6792 Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
U. S. Federal Register
§80.520(a)(1) Vol. 68, No. 100
Index Terms
diesel; diesel fuel; diesel fuel additives; electrochemical detection; gasoline; motor fuels; oxidative combustion; petroleum; sulfur; Diesel engine fuel oils; Distillate fuels; Electrochemical measurements/testing; Fuel sulfur; Gasoline; Motor fuels; Naphtha and naphtha derivatives; Oxidative combustion; Reformulated gasolines; Sulfur--petroleum products; Total sulfur content--petroleum products/applications;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：11/21/2013 點擊次數：1158