防火网
本站  
設為首頁 加入收藏 網站地圖  中文版 繁体 English
 
測試服務: 機車材料防火測試 | 建築產品防火測試 | 船舶防火測試 | 飛機防火測試 | 耐火測試 | 噴射火測試 | 其他測試
   
用戶名:
密碼:
驗證碼:
   
 
主要阻燃防火認證標準
火車船舶汽車建材
 
相關測試方法 更多>>
EN ISO 9239-1:2010地
EN ISO 1182:2010
NF P 92-501
NF P 92-507
法标F级测试
法标I级测试
法国M级测试
EN ISO 1182
EN ISO 9239-1
EN 13501-1
 
首頁   美国   ASTM D6522用便携式分析仪测定燃天然气的往复式发动机,燃气轮机,燃烧炉和工艺加热器排放的氧化氮,一氧化碳和氧浓度的标准试验方法
 

ASTM D6522用便携式分析仪测定燃天然气的往复式发动机,燃气轮机,燃烧炉和工艺加热器排放的氧化氮,一氧化碳和氧浓度的标准试验方法

ASTM D6522 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
ASTM D6522用便携式分析仪测定燃天然气的往复式发动机,燃气轮机,燃烧炉和工艺加热器排放的氧化氮,一氧化碳和氧浓度的标准试验方法

The results of this test method may be used to determine nitrogen oxides and carbon monoxide emissions from natural gas combustion.
This test method may also be used to monitor emissions to optimize process operation for nitrogen oxides and carbon monoxide control.

1. Scope
1.1 This test method covers the determination of nitrogen oxides (NO and NO2), carbon monoxide (CO), and oxygen (O2) concentrations in controlled and uncontrolled emissions from natural gas-fired reciprocating engines, combustion turbines, boilers, and process heaters. Due to the inherent cross sensitivities of the electrochemical cells, this test method should not be applied to other pollutants or emission sources without a complete investigation of possible analytical interferences and a comparative evaluation with EPA test methods.
1.1.1 The procedures and specifications of this method were developed during laboratory and field tests funded by the Gas Research Institute (GRI). Comparative emission tests were conducted only on natural gas-fired combustion sources.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D1356 Terminology Relating to Sampling and Analysis of Atmospheres
EPA Methods from 40 CFR Part 60, Appendix A
Method20 - Determination of Nitrogen Oxides, Sulfur Dioxide, and Diluent Emissions from Stationary Gas Turbines
EPA Methods from 40 CFR Part 63, Appendix A
Method301 - Field Validation of Pollutant Measurement Methods from Various Waste Media
EPA Methods from 40 CFR Part 75, Appendix H
RevisedTraceabilityP Protocol G1 and G2 Procedures
Index Terms
electrochemical cells; carbon monoxide emissions; emissions; natural gas combustion; oxygen emissions; portable analyzers; test method for nitrogen oxides;

更多防火阻燃测试认证,请咨询中国防火网
电话:400-666-7290
网址:www.firete.com
邮箱:info@firete.com

...


 來源:防火網 發布時間:11/18/2013 點擊次數:1287

 上一條: ASTM E2243表面矿山改造用煤燃烧产品的使用标准指南:重新沿等高线修筑和改造

 下一條: ASTM D6545儿童睡衣用纺织品易燃性的标准试验方法
 
 
網站首頁 | 測試服務 | 各國標準 | 新聞資訊 | 防火材料 | 會展信息 | 認證服務 | 在線咨詢 | 聯系我們
Copyright © 2009-2023 Firete.com All Right Reserved 蘇公網安備 32010502010088號
服務熱線:+86 25-86583475   備案號:苏ICP备10201999号-1 DIN5510-2 DIN5510 防火網博客