ASTM D6357测定煤,焦碳和煤利用过程中产生的燃烧残余物中痕量元素的试验方法

ASTM D6357 Test Methods for Determination of Trace Elements in Coal, Coke, & Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission, Inductively Coupled Plasma Mass, & Graphite Furnace Atomic Absorption Spectrometry
ASTM D6357用感应耦合等离子体原子发射光谱法,感应耦合等离子体质谱法和石墨炉原子吸收光谱法测定煤,焦碳和煤利用过程中产生的燃烧残余物中痕量元素的试验方法

Coal contains several elements whose individual concentrations are generally less than 0.01 %. These elements are commonly and collectively referred to as trace elements. These elements primarily occur as part of the mineral matter in coal. The potential release of certain trace elements from coal combustion sources has become an environmental concern.
The ash prepared in accordance with these provisional test methods quantitatively retains the elements listed in 1.1 and is representative of their concentrations in the coal or coke.

1. Scope
1.1 These test methods pertain to the determination of antimony, arsenic, beryllium, cadmium, chromium, cobalt, copper, lead, manganese, molybdenum, nickel, vanadium, and zinc in coal and coke. These test methods can also be used for the analysis of residues from coal combustion processes.
Note 1—These test methods may be applicable to the determination of other trace elements.
1.2 The values stated in SI units shall be regarded as the standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D121 Terminology of Coal and Coke
ASTM D346 Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
ASTM D1193 Specification for Reagent Water
ASTM D2013 Practice for Preparing Coal Samples for Analysis
ASTM D3173 Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3180 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D7448 Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
ASTM D7582 Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis
ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Other Documents
EPA/600/4-91/010 Methods for the Determination of Metals in Environmental Samples
Index Terms
coal; coal ash; graphite furnace atomic absorption spectrometer; inductively coupled plasma atomic emission spectrometer; inductively coupled plasma mass spectrometer; trace elements; Coal ash; Coal products; Graphite furnace atomic absorption spectrometry (GFAAS); ICP-AES (inductively-coupled plasma atomic emission spectrometry); ICP-MS (inductively-coupled plasma-mass spectrometry); Trace elements--coal/coke;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：11/15/2013 點擊次數：1393