ASTM D5516暴露在高温下的阻燃处理软木胶合板弯曲性能测试方法标准

ASTM D5516 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
ASTM D5516 暴露在高温下的阻燃处理软木胶合板弯曲性能测试方法标准

The flexural properties evaluated by this test method are intended to provide any one or all of the following:
Data on the comparative effects of fire-retardant chemical formulations and environmental conditions on the flexural properties of plywood.
Data for use in developing modification factors for the allowable design properties of treated plywood when exposed to elevated temperatures and humidities.
Data comparing variables, such as other plywood species and dimensions.
Results obtained from tests conducted and analyzed in accordance with the procedures of this test method may be used with other information to establish recommended roof sheathing spans for fire-retardant treated plywood.
Note 1—Temperatures lower than the test temperature specified in this test method and the cumulative effects of the elevated temperatures and humidity exposures expected to be encountered in service should be taken into account when recommended roof sheathing spans are established.

1. Scope
1.1 This test method is designed to determine the effect of exposure to high temperatures and humidities on the flexure properties of fire-retardant treated softwood plywood. In this test method, plywood is exposed to a temperature of 77°C (170°F).

1.2 The purpose of the test method is to compare the flexural properties of fire-retardant treated plywood relative to untreated plywood. The results of tests conducted in accordance with this test method provide a reference point for estimating strength temperature relationships. This test method is intended to provide an accelerated test at elevated temperatures and controlled humidities of plywood sheathing treated with the same chemical formulation(s) and processing conditions as plywood used commercially.

1.3 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D9 Terminology Relating to Wood and Wood-Based Products
ASTM D1165 Nomenclature of Commercial Hardwoods and Softwoods
ASTM D2915 Practice for Evaluating Allowable Properties for Grades of Structural Lumber
ASTM D3043 Test Methods for Structural Panels in Flexure
ASTM D6305 Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
ASTM E84 Test Method for Surface Burning Characteristics of Building Materials
ASTM E176 Terminology of Fire Standards

Other Standards
PS2 U.S. Product Standard for Wood-Based Structural Use Panels

Index Terms
bending properties; fire retardant; flexural properties; plywood; roof sheathing; strength effects; temperature; thermal effects; treatment; Bend testing--wood products; Flexural testing--wood products; Strength--wood materials/applications; Elevated temperature tests; Fire-retardant-treated wood/wood-base materials; Plywood; Roof sheathing; Thermal effects; Treated wood;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 來源：防火網　發布時間：11/6/2013 點擊次數：1449