CAN/ULC S101 Standard Methods of Fire Endurance Tests of Building Construction and Materials 15-minute stay in place
CAN/ULC S102 Standard Method of Test for Surface Burning characteristics of Building Materials and Assemblies Flame Spread ≤25, Smoke Development ≤450
CAN/ULC S126 Standard Method of Test for Fire Spread Under Roof-Deck Assemblies Complies
CAN/ULC S127 Standard Corner Wall Method of Test for Flammability Characteristics of Non-Melting Foam Plastic Building Materials Flame Spread ≤350 foam core w/o steel skin
CAN/ULC S138 Standard Method of Test for Fire Growth of Insulated Building Metal Panels in a Full-Scale Room Configuration Complies
ASTM E84 Standard Test Method for Surface Burning Characteristics of Building Materials Flame Spread≤25, Smoke Development ≤450
NFPA 286 Standard Methods of Fire Tests for Evaluating Contribution for Wall and Ceiling Interior Finish to Room Fire Growth Complies
ASTM E72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction See Load Charts for load/span and deflection tables
ASTM E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference See Load Charts
ASTM E1646 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems No water penetration at 20 psf pressure differential
ASTM E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems 0.004 cfm/ft2 at 6.27 psf
ASTM E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen 0.004 cfm/ft2 at 6.27 psf
ASTM E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference No water penetration at 20 psf pressure differential
ASTM C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus K-Factor of 0.136 BTU.in/hr.ft2. 0F at 750F
ASTM C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus K-Factor of 0.12 BTU.in/hr.ft2. 0F at 390F
蘇公網安備 32010502010088號
測試服務：
主要阻燃防火認證標準
