ASTM C1631聚丙烯泡沫绝热的标准规范

ASTM C1631 Standard Specification for Cellular Polypropylene Thermal Insulation
ASTM C1631 聚丙烯泡沫绝热的标准规范

1. Scope
1.1 This specification covers the types, physical properties, and dimensions of cellular polypropylene intended for use as thermal insulation for temperatures from - 150 to + 240°F (-101 to + 116°C).
1.2 The use of thermal insulation materials covered by this specification is regulated by codes and standards that address fire performance.
1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM C165 Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C168 Terminology Relating to Thermal Insulation
ASTM C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C272 Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
ASTM C303 Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
ASTM C390 Practice for Sampling and Acceptance of Thermal Insulation Lots
ASTM C518 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM C870 Practice for Conditioning of Thermal Insulating Materials
ASTM C1114 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
ASTM C1363 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
ASTM D1600 Terminology for Abbreviated Terms Relating to Plastics
ASTM D1622 Test Method for Apparent Density of Rigid Cellular Plastics
ASTM D2126 Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D3575 Test Methods for Flexible Cellular Materials Made From Olefin Polymers
ASTM E84 Test Method for Surface Burning Characteristics of Building Materials
ASTM E96/E96M Test Methods for Water Vapor Transmission of Materials
ASTM E176 Terminology of Fire Standards
Underwriters Laboratories Standard
UL723 Test for Surface Burning Characteristics of Building Materials
Index Terms
block/board; cellular polypropylene; foam plastic; polypropylene; PP; XPP; thermal insulation, thermal resistance; thermal conductivity; compressive strength; water vapor permeance; water absorption; dimensional stability; profiled insulation; combustible;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...
 

 来源：防火网　发布时间：12/26/2013 点击次数：2160