ASTM D3032连接线绝缘的标准试验方法

ASTM D3032连接线绝缘的标准试验方法

ASTM D3032 Standard Test Methods for Hookup Wire Insulation
ASTM D3032 连接线绝缘的标准试验方法

These test methods detail the standard procedures for testing hookup wire insulations including all components of the insulation system used on single insulated conductors or an assembly of single insulated conductors such as a cable bundle and harness or flat ribbon cable. The insulating materials include not only the primary insulation over the conductor, but also insulating jackets over shielded constructions. The test procedures covered here shall be performed in the conditions or shall determine the properties, as follows: axial stability (longitudinal change) after thermal exposure; bondability to potting compounds; capacitance; cold bend test; concentricity; crush resistance; dielectric breakdown voltage; dimensions; dry-arc tracking; dynamic cut-through; fluid immersion; high temperature shock; insulation-continuity proof tests; insulation resistance; partial discharge (corona) inception and extinction voltage; relative thermal life and temperature index; strip force; surface resistance; tensile properties; vertical flame test; voltage rating of hook-up wire; voltage withstand test; and wet arc-tracking.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

1. Scope
1.1 These test methods cover procedures for testing hookup wire.
1.2 For the purposes of these test methods, hookup wire insulation includes all components of the insulation system used on single insulated conductors or an assembly of single insulated conductors such as a cable bundle and harness or flat ribbon cable. The insulating materials include not only the primary insulation over the conductor, but also insulating jackets over shielded constructions.
1.3 The test procedures and their locations are as follows:

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D150 Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation
ASTM D257 Test Methods for DC Resistance or Conductance of Insulating Materials
ASTM D374 Test Methods for Thickness of Solid Electrical Insulation
ASTM D412 Test Methods for Vulcanized Rubber and Thermoplastic Elastomers--Tension
ASTM D471 Test Method for Rubber Property--Effect of Liquids
ASTM D543 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D638 Test Method for Tensile Properties of Plastics
ASTM D1711 Terminology Relating to Electrical Insulation
ASTM D1868 Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems
ASTM D2303 Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
ASTM D2307 Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire
ASTM D2865 Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D3183 Practice for Rubber--Preparation of Pieces for Test Purposes from Products
ASTM D3636 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D3638 Test Method for Comparative Tracking Index of Electrical Insulating Materials
ASTM D5032 Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions
ASTM D5374 Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D5423 Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
ASTM D6054 Practice for Conditioning Electrical Insulating Materials for Testing
ASTM E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
IEEE Standards
Standard101 Statistical Analysis of Thermal Life Test Data
Federal Standard
FederalSpecification for Tape, Gummed; Paper, Reinforced and Plain, for Sealing and Securing (PPP-T-45C)
Index Terms
ambient temperature; arcing; arc-propagation; arc-tracking; atmospheric pressure; breakdown voltage; cable; circuit breakers; current limiting; cuts; degradation; dropping apparatus; dry-arcing; electrical insulation; electrolyte; extinction voltage; flame propagation; flame spread; flame test; flammability; hookup wire; insulation thickness; moisture; open-circuit detection; partial discharge; power supply; safe voltage; scintillation; service condition; short-circuit detection; shutdown equipment; track resistant; tracking; transportation vehicles; voltage rating; wet; wire abrasion; wire chafing; wire insulation; Concentricity; Continuity; Dielectric breakdown voltage; Diesel engine cylinder liners; Dimensions; Electrical insulating solids; Electrical resistance/resistivity--insulating materials; Hookup wire; Mercury U-tube method; Permittivity (dielectric constant)--electrical insulating materials; Temperature tests--electrical insulation; Voltage

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 来源：防火网　发布时间：12/18/2013 点击次数：2016