ASTM E1602测定铅含量的标准试验方法

ASTM E1602 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
ASTM E1602用感应耦合等离子体原子发射光谱法(ICP-AES),火焰原子吸收光谱法(FAAS)或石墨炉原子吸收光谱技术(GFAAS)测定铅含量的标准试验方法.

This guide can be used by code officials, architects, and other interested parties to evaluate the design and construction of masonry heaters. It is not restricted to a specific method of construction, nor does it provide all specific details of construction of a masonry heater. This guide does provide the principles to be followed for the safe construction of masonry heaters.
This guide is not intended as a complete set of directions for construction of masonry heaters.
Construction of masonry heaters is complex, and in order to ensure their safety and performance, construction shall be done by or under the supervision of a skilled and experienced masonry heater builder.

1. Scope
1.1 This guide covers the design and construction of solid fuel burning masonry heaters. It provides dimensions for site constructed masonry heater components and clearances that have been derived by experience and found to be consistent with the safe installation of those masonry heaters.
1.2 Values given in SI units are to be regarded as standard. Inch/pound units may be rounded (see ). All dimensions are nominal unless specifically stated otherwise. All clearances listed in this guide are actual dimensions.
1.3 This guide applies to the design and construction of masonry heaters built on-site with the components and materials specified herein. It does not apply to the construction/installation requirements for component systems that have been safety tested and listed. The requirements for listed masonry heater systems are specified in the manufacturer's installation instructions.
1.4 The design and construction of solid fuel burning masonry heaters shall comply with applicable building codes.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM C11 Terminology Relating to Gypsum and Related Building Materials and Systems
ASTM C43 Terminology of Structural Clay Products
ASTM C71 Terminology Relating to Refractories
ASTM C270 Specification for Mortar for Unit Masonry
ASTM C401 Classification of Alumina and Alumina-Silicate Castable Refractories
ASTM E136 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750C

UL Standards
UL103 Chimneys, Factory Built Residential Type and Building Heating Appliances
Index Terms
brick; Contraflow; firebrick; fire clay mortar; Grundofen; Kachelofen; Kakelugn; masonry heater; mortar; refractory mortar; Russian; soapstone refractory mortar; Solid fuel-burning masonry heaters; Construction; Contraflow; Brick; Firebrick; Fire clay mortar; Grundofen; Kachelofen/Kakelugn; Masonry heater; Mortar; Refractory mortar; Russian; Soapstone refractory mortar;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 来源：防火网　发布时间：11/8/2013 点击次数：1581