CAN/ULC S101
Standard Methods of Fire Endurance Tests of Building Construction and Materials
15-minute stay in place
CAN/ULC S102
Standard Method of Test for Surface Burning characteristics of Building Materials and Assemblies
Flame Spread ≤25, Smoke Development ≤450
CAN/ULC S126
Standard Method of Test for Fire Spread Under Roof-Deck Assemblies
Complies
CAN/ULC S127
Standard Corner Wall Method of Test for Flammability Characteristics of Non-Melting Foam Plastic Building Materials Flame Spread ≤350 foam core w/o steel skin
CAN/ULC S138
Standard Method of Test for Fire Growth of Insulated Building Metal Panels in a Full-Scale Room Configuration
Complies
ASTM E84
Standard Test Method for Surface Burning Characteristics of Building Materials
Flame Spread≤25, Smoke Development ≤450
NFPA 286
Standard Methods of Fire Tests for Evaluating Contribution for Wall and Ceiling Interior Finish to Room Fire Growth
Complies
ASTM E72
Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
See Load Charts for load/span and deflection tables
ASTM E1592
Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
See Load Charts
ASTM E1646
Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems
No water penetration at 20 psf pressure differential
ASTM E1680
Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
0.004 cfm/ft2 at 6.27 psf
ASTM E283
Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
0.004 cfm/ft2 at 6.27 psf
ASTM E331
Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
No water penetration at 20 psf pressure differential
ASTM C518
Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
K-Factor of 0.136 BTU.in/hr.ft2. 0F at 750F
ASTM C1363
Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
K-Factor of 0.12 BTU.in/hr.ft2. 0F at 390F
苏公网安备 32010502010088号
测试服务：
主要阻燃防火认证标准
