ASTM C647胶合辅料和涂覆品性能及试验标准指南

ASTM C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
ASTM C647 胶合辅料和涂覆品性能及试验标准指南

Each of the properties listed should be considered in selecting materials for specific projects. A list of the selected properties with limiting values assigned will form a part of the product specification.
All of the properties may not be pertinent in any specific situation, and all of the tests outlined may not be required. A condition to any specification must be an evaluation of the proposed use to determine which properties may be required.
Membrane reinforcements are frequently specified and used with mastics and coatings. Service properties of such systems of finishes may be different from the unreinforced finishes; therefore, it is essential to test specimens of the reinforced system.

1. Scope
1.1 This guide identifies properties of mastics and coating finishes characterizing their performance as finishes for thermal insulation.
1.2 These properties relate to application and service. Each property is defined, and its significance and suggested test methods are described.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM C168 Terminology Relating to Thermal Insulation
ASTM C419 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
ASTM C461 Test Methods for Mastics and Coatings Used With Thermal Insulation
ASTM C488 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
ASTM C639 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
ASTM C681 Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
ASTM C733 Test Method for Volume Shrinkage of Latex Sealants
ASTM C755 Practice for Selection of Water Vapor Retarders for Thermal Insulation
ASTM C792 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
ASTM D36 Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
ASTM D56 Test Method for Flash Point by Tag Closed Cup Tester
ASTM D92 Test Method for Flash and Fire Points by Cleveland Open Cup Tester
ASTM D93 Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
ASTM D529 Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
ASTM D543 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
ASTM D562 Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer
ASTM D638 Test Method for Tensile Properties of Plastics
ASTM D658 Test Method for Abrasion Resistance of Organic Coatings by Air Blast Abrasive
ASTM D747 Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
ASTM D822 Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D903 Test Method for Peel or Stripping Strength of Adhesive Bonds
ASTM D968 Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
ASTM D1310 Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus
ASTM D1640 Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature
ASTM D1654 Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
ASTM D1729 Practice for Visual Appraisal of Colors and Color Differences of Diffusely-Illuminated Opaque Materials
ASTM D1823 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
ASTM D1824 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
ASTM D1849 Test Method for Package Stability of Paint
ASTM D2196 Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield type) Viscometer
ASTM D2243 Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
ASTM D2354 Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles
ASTM D2444 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
ASTM D2453 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
ASTM D2485 Test Methods for Evaluating Coatings For High Temperature Service
ASTM D2507 Terminology of Rheological Properties of Gelled Rocket Propellants
ASTM D2939 Test Methods for Emulsified Bitumens Used as Protective Coatings
ASTM D3134 Practice for Establishing Color and Gloss Tolerances
ASTM D3274 Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
ASTM D3361 Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
ASTM D3828 Test Methods for Flash Point by Small Scale Closed Cup Tester
ASTM D4339 Test Method for Determination of the Odor of Adhesives
ASTM E84 Test Method for Surface Burning Characteristics of Building Materials
ASTM E96/E96M Test Methods for Water Vapor Transmission of Materials
ASTM E162 Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
ASTM E659 Test Method for Autoignition Temperature of Liquid Chemicals
ASTM G21 Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
ASTM G23 Practice for Operating Light-Exposure Apparatus (Carbon-Arc Type) With and Without Water for Exposure of Nonmetallic Materials (Discontinued 2001)
Index Terms
application properties; mastic coating; service properties; Bituminous mastic coatings (for thermal insulating materials); Coatings (thermal insulating materials); Thermal insulating materials (mastic coatings);

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...
 

 来源：防火网　发布时间：12/26/2013 点击次数：2912