ASTM C945室外容器上刚性蜂窝式聚氨酯绝缘系统的设计考虑和喷射应用的标准规范

ASTM C945 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
ASTM C945 室外容器上刚性蜂窝式聚氨酯绝缘系统的设计考虑和喷射应用的标准规范
 
This practice facilitates the selection and application of an insulation system for use at service temperatures between ? 30 and + 107°C (?22 and + 225°F). Although the successful installation of spray-applied PUR/PIR is influenced by many factors, this practice treats those four areas found to be of major importance:
(1) Substrate preparation,
(2) Substrate priming,
(3) Insulation application, and
(4) Protective coatings.
Abrasive blasting, primer application, spray application of the insulation, and protective coating application each contribute their unique health and safety hazards to the job site and will be dealt with in more detail under their respective headings.

1. Scope
1.1 This practice concerns itself with the substrate preparation and priming, the selection of the rigid cellular polyurethane system, and the protective insulation coatings for outdoor service equipment.
Note 1--For the purpose of this practice, polyurethane is defined to mean either polyurethane or polyisocyanurate and is hereafter referred to as "PUR/PIR."
1.2 The values given in inch-pound are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM C168 Terminology Relating to Thermal Insulation
ASTM D883 Terminology Relating to Plastics
ASTM D1600 Terminology for Abbreviated Terms Relating to Plastics
ASTM D2200 Pictorial Surface Preparation Standards for Painting Steel Surfaces
American National Standards
Z87.1 Practice for Occupational and Educational Eye and Face Protection
National Association of Corrosion Engineers Standard
TM-01-70 Visual Surface Preparation Panels
Index Terms
coating; outdoor service vessels; spray foam;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...
 

 来源：防火网　发布时间：12/25/2013 点击次数：1673