防火网
本站  
设为首页 加入收藏 网站地图   中文版 繁体 English
 
测试服务: 机车材料防火测试 | 建筑产品防火测试 | 船舶防火测试 | 飞机防火测试 | 耐火测试 | 喷射火测试 | 其他测试
   
用户名:
密码:
验证码:
   
 
主要阻燃防火认证标准
火车船舶汽车建材
 
相关测试方法 更多>>
EN ISO 9239-1:2010地
EN ISO 1182:2010
NF P 92-501
NF P 92-507
法标F级测试
法标I级测试
法国M级测试
EN ISO 1182
EN ISO 9239-1
EN 13501-1
 
首页   美国   ASTM C417未经焙烧的整块耐火材料导热性标准试验方法
 

ASTM C417未经焙烧的整块耐火材料导热性标准试验方法

ASTM C417 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
ASTM C417 未经焙烧的整块耐火材料导热性标准试验方法

The thermal conductivity of monolithic refractories is a property required for selecting their thermal transmission characteristics. Users select monolithic refractories to provide specified conditions of heat loss and cold face temperature, without exceeding the temperature limitation of the monolithic refractory. This test method establishes placement of thermocouples and positioning of test specimens in the calorimeter.
This procedure must be used with Test Method C201 and requires a large thermal gradient and steady state conditions. The results are based upon a mean temperature.
The data from this test method are suitable for specification acceptance, estimating heat loss and surface temperature, and the design of multi-layer refractory construction.
The use of these data requires consideration of the actual application environment and conditions.

1. Scope
1.1 This test method supplements Test Method C201, and shall be used in conjunction with that test method for determining the thermal conductivity of unfired monolithic refractories.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM C182 Test Method for Thermal Conductivity of Insulating Firebrick
ASTM C201 Test Method for Thermal Conductivity of Refractories
ASTM C862 Practice for Preparing Refractory Concrete Specimens by Casting
ASTM C1054 Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
ASTM E220 Test Method for Calibration of Thermocouples By Comparison Techniques
Index Terms
calorimeter; castable refractories; monolithic refractories; plastic refractories; refractories; thermal conductivity; Refractories (castable); Refractories (monolithic); Thermal analysis (TA)--refractories ;

更多防火阻燃测试认证,请咨询中国防火网
电话:400-666-7290
网址:www.firete.com
邮箱:info@firete.com

...


 来源:防火网 发布时间:12/24/2013 点击次数:1596

 上一条: ASTM C411高温隔热材料受热面性能的标准试验方法

 下一条: ASTM C424用热压处理法测定焙烧卫生釉瓷抗破裂性标准试验方法
 
 
网站首页 | 测试服务 | 各国标准 | 新闻资讯 | 防火材料 | 会展信息 | 认证服务 | 在线咨询 | 联系我们
Copyright © 2009-2024 Firete.com All Right Reserved 苏公网安备 32010502010088号
服务热线:025-86583475   备案号:苏ICP备10201999号-1 DIN5510-2 DIN5510 防火网博客