ASTM D3682煤利用过程中燃烧残留物中主要和次要元素的标准试验方法

ASTM D3682 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes
ASTM D3682 煤利用过程中燃烧残留物中主要和次要元素的标准试验方法

A compositional analysis of the ash in coal is often useful in the total description of the quality of the coal. Knowledge of ash composition is also useful in predicting the behavior of ashes and slags in combustion chambers. Utilization of the ash by-products of coal combustion sometimes depends on the chemical composition of the ash.
Note that the chemical composition of laboratory-prepared coal ash may not exactly represent the composition of mineral matter in the coal or the composition of fly ash and slag resulting from commercial-scale burning of the coal.

1. Scope
1.1 This test method covers the analysis of the commonly determined major and minor elements in combustion residues from coal utilization processes.
Note 1
Test Methods D 1757 or D 5016 shall be used for determination of sulfur.
1.2 The values stated in SI units (IEEE/ASTM SI 10 ) shall to be regarded as the standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D1193 Specification for Reagent Water
ASTM D1757 Test Method for Sulfate Sulfur in Ash from Coal and Coke
ASTM D2013 Practice of Preparing Coal Samples for Analysis
ASTM D3173 Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3174 Test Method for Ash in the Analysis Sample of Coal and Coke from Coal
ASTM D3180 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D5016 Test Method for Sulfur in Ash from Coal, Coke, and Residues from Coal Combustion Using High-Temperature Tube Furnace Combustion Method with Infrared Absorption
ASTM D5142 Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
Index Terms
aluminum oxide (A12O3); ash analysis; atomic absorption spectroscopy; calcium oxide (CaO); elemental ash composition; ferric oxide (Fe2O3); magnesium oxide (MgO); potassium oxide (K2O); silicon dioxide (SiO2); sodium oxide (Na2O); titanium dioxide (TiO2);

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...
 

 来源：防火网　发布时间：12/23/2013 点击次数：1325