ASTM D3394电绝缘板抽样和试验标准试验方法

ASTM D3394 Standard Test Methods for Sampling and Testing Electrical Insulating Board
ASTM D3394 电绝缘板抽样和试验标准试验方法
Apparent density affects the dielectric and physical characteristics of insulating board and is a factor in the economics of its use in apparatus. This test is useful for specification, design, and quality control purposes.

1. Scope
1.1 These test methods cover the sampling and testing of electrical insulating boards. These boards are porous, usually fibrous sheets used for dielectric and structural purposes in electrical apparatus.
1.2 These test methods are not intended for testing vulcanized fibre or molded laminated sheets.
1.3 These test methods are applicable to board materials having a nominal thickness of at least 0.030 in. (0.76 mm).
Note 1—For materials thinner than 0.030 in. (0.76 mm) see Test Methods D202.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D202 Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D374 Test Methods for Thickness of Solid Electrical Insulation
ASTM D586 Test Method for Ash in Pulp, Paper, and Paper Products
ASTM D644 Test Method for Moisture Content of Paper and Paperboard by Oven Drying
ASTM D664 Test Method for Acid Number of Petroleum Products by Potentiometric Titration
ASTM D685 Practice for Conditioning Paper and Paper Products for Testing
ASTM D877 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D924 Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids
ASTM D971 Test Method for Interfacial Tension of Oil Against Water by the Ring Method
ASTM D974 Test Method for Acid and Base Number by Color-Indicator Titration
ASTM D1169 Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
ASTM D1500 Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
ASTM D1816 Test Method for Dielectric Breakdown Voltage of Insulating Oils of Petroleum Origin Using VDE Electrodes
ASTM D2413 Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric
ASTM D2865 Practice for Calibration of Standards and Equipment for Electrical Insulating Materials Testing
ASTM D3426 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves
ASTM D3455 Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin
ASTM D3487 Specification for Mineral Insulating Oil Used in Electrical Apparatus
ASTM D3636 Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
ASTM D4243 Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards
ASTM E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
TAPPI Standard
T413 Determination of Ash in Paper
Index Terms
aqueous extract characteristics pH; ash content; compressibility; conditioning; conductivity; degree of polymerization; dielectric strength; dimensions; electrical insulating board density; impulse dielectric strength; moisture content; oil absorption; shrinkage; tensile properties; Aqueous extract characteristics pH; Compressibility; Conductance and conductivity (electrical); Density--apparent (bulk); Dielectric breakdown voltage; Electrical insulating paper/paperboard; Oil absorption; Sampling electrical inisulating materials; Shrinkage;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...
 
 

 来源：防火网　发布时间：12/23/2013 点击次数：1619