防火网
本站  
设为首页 加入收藏 网站地图   中文版 繁体 English
 
测试服务: 机车材料防火测试 | 建筑产品防火测试 | 船舶防火测试 | 飞机防火测试 | 耐火测试 | 喷射火测试 | 其他测试
   
用户名:
密码:
验证码:
   
 
主要阻燃防火认证标准
火车船舶汽车建材
 
相关测试方法 更多>>
EN ISO 9239-1:2010地
EN ISO 1182:2010
NF P 92-501
NF P 92-507
法标F级测试
法标I级测试
法国M级测试
EN ISO 1182
EN ISO 9239-1
EN 13501-1
 
首页   美国   ASTM D6522用便携式分析仪测定燃天然气的往复式发动机,燃气轮机,燃烧炉和工艺加热器排放的氧化氮,一氧化碳和氧浓度的标准试验方法
 

ASTM D6522用便携式分析仪测定燃天然气的往复式发动机,燃气轮机,燃烧炉和工艺加热器排放的氧化氮,一氧化碳和氧浓度的标准试验方法

ASTM D6522 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers
ASTM D6522用便携式分析仪测定燃天然气的往复式发动机,燃气轮机,燃烧炉和工艺加热器排放的氧化氮,一氧化碳和氧浓度的标准试验方法

The results of this test method may be used to determine nitrogen oxides and carbon monoxide emissions from natural gas combustion.
This test method may also be used to monitor emissions to optimize process operation for nitrogen oxides and carbon monoxide control.

1. Scope
1.1 This test method covers the determination of nitrogen oxides (NO and NO2), carbon monoxide (CO), and oxygen (O2) concentrations in controlled and uncontrolled emissions from natural gas-fired reciprocating engines, combustion turbines, boilers, and process heaters. Due to the inherent cross sensitivities of the electrochemical cells, this test method should not be applied to other pollutants or emission sources without a complete investigation of possible analytical interferences and a comparative evaluation with EPA test methods.
1.1.1 The procedures and specifications of this method were developed during laboratory and field tests funded by the Gas Research Institute (GRI). Comparative emission tests were conducted only on natural gas-fired combustion sources.
1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D1356 Terminology Relating to Sampling and Analysis of Atmospheres
EPA Methods from 40 CFR Part 60, Appendix A
Method20 - Determination of Nitrogen Oxides, Sulfur Dioxide, and Diluent Emissions from Stationary Gas Turbines
EPA Methods from 40 CFR Part 63, Appendix A
Method301 - Field Validation of Pollutant Measurement Methods from Various Waste Media
EPA Methods from 40 CFR Part 75, Appendix H
RevisedTraceabilityP Protocol G1 and G2 Procedures
Index Terms
electrochemical cells; carbon monoxide emissions; emissions; natural gas combustion; oxygen emissions; portable analyzers; test method for nitrogen oxides;

更多防火阻燃测试认证,请咨询中国防火网
电话:400-666-7290
网址:www.firete.com
邮箱:info@firete.com

...


 来源:防火网 发布时间:11/18/2013 点击次数:1654

 上一条: ASTM E2243表面矿山改造用煤燃烧产品的使用标准指南:重新沿等高线修筑和改造

 下一条: ASTM D6545儿童睡衣用纺织品易燃性的标准试验方法
 
 
网站首页 | 测试服务 | 各国标准 | 新闻资讯 | 防火材料 | 会展信息 | 认证服务 | 在线咨询 | 联系我们
Copyright © 2009-2024 Firete.com All Right Reserved 苏公网安备 32010502010088号
服务热线:025-86583475   备案号:苏ICP备10201999号-1 DIN5510-2 DIN5510 防火网博客