ASTM D6414通过酸提取或潮湿氧化/冷蒸气原子吸收对煤和煤燃烧残留物中总汞的标准试验方法

ASTM D6414 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption
ASTM D6414通过酸提取或潮湿氧化/冷蒸气原子吸收对煤和煤燃烧残留物中总汞的标准试验方法

The emission of mercury during coal combustion can be an environmental concern.
When representative test portions are analyzed according to one of these procedures, the total mercury is representative of concentrations in the sample.

1. Scope
1.1 These test methods cover procedures to determine the total mercury content in a sample of coal or coal combustion residue.
1.2 The values stated in SI units are regarded as the standard.
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D121 Terminology of Coal and Coke
ASTM D1193 Specification for Reagent Water
ASTM D2013 Practice for Preparing Coal Samples for Analysis
ASTM D3173 Test Method for Moisture in the Analysis Sample of Coal and Coke
ASTM D3180 Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
ASTM D5142 Test Methods for Proximate Analysis of the Analysis Sample of Coal and Coke by Instrumental Procedures
ASTM E691 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ISO Standard
ISO5725-6:1994 Accuracy of measurement methods and results-Part 6
Index Terms
coal; coal combustion residues; cold-vapor atomic absorption; mercury;

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 来源：防火网　发布时间：11/15/2013 点击次数：1907