2018版加拿大防火测试标准 CAN/ULC-S102:2018及其它标准

南京睿督公司与北美实验室合作提供CAN/ULC-S102:2018,CAN/ULC-S102.2:2018, CAN/ULC-S102.3:2018等标准测试。更多关于CAN/ULC-S102最新版本标准内容，请咨询南京睿督公司，咨询电话：025-8658 3475。

加拿大CAN/ULC S102防火性能测试
用于加拿大的建筑材料及产品需要根据加拿大标准CAN/ULC-S 102进行防火性能测试。加拿大CAN/ULC-S 102此法用于测定建材表面燃烧性能。测试方法基本上类似于美国的ASTM E84法。加拿大CAN/ULC-S 102测试至少要进行3次测试，计算出火焰传播指数FSI1及FSI2。南京睿督公司咨询电话：025-8658 3475。
 
将火焰前沿移动的距离对时间作图，如所得曲线下的总面积AT≤29.7m.min，则FSI=1.85AT如AT＞29.7 m.min，则FSI1＝1640/(59.4-AT)。有些材料燃烧时，其火焰前沿在试验早期可能传播很快，但随后即减慢，甚至最终不能达到试件末端，这时系按下式计算FSI2值。
FSI2＝92.5d/t。
d-火焰前沿传播速率开始明显下降时移动的距离，m；
t-火焰前沿移动距离d相应的时间，min。
 
根据加拿大的有关建材规范，按照CAN/ULC-S 102火焰传播指数及生烟性能对材料进行分类。以红橡木的曲线包围的面积为100，以石棉－水泥曲线包围的面积为0，将测试样品的曲线包围的面积与红橡木的相应值比较，以评估试件的热释放性。

CAN/ULC-S102测试方法相关内容
CAN ULC-S102表面燃烧性能测试 http://www.fire-test.com/newscenter/news/6708.html
CAN ULC-S102.2 http://www.fire-test.com/teststandard/usa/7182.html  
CAN ULC-S102.3 http://www.fire-test.com/newscenter/regulation/10806.html
CAN/ULC-S127可燃性测试 http://www.fire-test.com/newscenter/regulation/11980.html

2018版加拿大防火测试标准最新标准
Standards Bulletin 2018-01 CAN/ULC-S651:2016-REV1, Standard for Emergency Valves for Flammable and Combustible Liquids

Standards Bulletin 2018-02 CAN/ULC-S639:2018, Standard for Steel Liner Assemblies for Solid-Fuel Burning Masonry Fireplaces

Standards Bulletin 2018-03 CAN/ULC-S718:2018, Standard for Site Quality Assurance Program for Spray Applied Polyurethane Foam

Standards Bulletin 2018-04 Call for Members: ULC Technical Committee S4400 on Cannabis

Standards Bulletin 2018-05 ANSI/CAN/UL/ULC 2258:2018, Standard for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids

Standards Bulletin 2018-06 CAN/ULC-S102.3:2018, Standard Method of Fire Test of Light Diffusers and Lenses

Standards Bulletin 2018-07 CAN/ULC-S114:2018, Standard Method of Test for Determination of Non-Combustibility in Building Materials

Standards Bulletin 2018-08 CAN/ULC-S124:2018, Standard Method of Test for the Evaluation of Thermal Barriers for Foamed Plastic

Standards Bulletin 2018-09 CAN/ULC-S145:2018, Standard Method of Test for the Evaluation of Protective Coverings for Foamed Plastic Insulation – Full-Scale Room Test

Standards Bulletin 2018-10 CAN/ULC-S130:2018, Standard Method of Test for Ignition Resistance of Loose Fill Insulation (Cigarette Method)

Standards Bulletin 2018-11 CAN/ULC-S115:2018, Standard Method of Fire Tests of Firestop Systems

Standards Bulletin 2018-12 CAN/ULC-S610:2018, Standard for Factory-Built Fireplace Systems

Standards Bulletin 2018-13 CAN/ULC-S102:2018, Standard Method of Test for Surface Burning Characteristics of Building Materials and Assemblies

Standards Bulletin 2018-14 CAN/ULC-S102.2:2018, Standard Method of Test for Surface Burning Characteristics of Flooring, Floor Coverings, and Miscellaneous Materials and Assemblies

Standards Bulletin 2018-18 ANSI/CAN/UL/ULC-2271:2018, Standard for Batteries for Use In Light Electric Vehicle (LEV) Applications

Standards Bulletin 2018-19 ANSI/CAN/UL/ULC 1369:2018, Standard for Aboveground Piping for Flammable and Combustible Liquids

Standards Bulletin 2018-20 CAN/ULC-S304:2016-REV1, Standard for Control Units, Accessories and Receiving Equipment for Intrusion Alarm Systems

Standards Bulletin 2018-23 ANSI/CAN/UL/ULC 1316:2018, Standard for Fibre Reinforced Underground Tanks for Flammable and Combustible Liquids

Standards Bulletin 2018-24 CAN/ULC-S139:2018-REV1, Standard for Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control, and Data Cables

更多关于CAN/ULC-S102最新版防火测试相关内容，请咨询南京睿督公司
咨询电话：025-8658 3475  400-603-6575
网址：www.fire-test.com
邮箱：info@fire-test.com

...

 来源：防火网　发布时间：1/11/2019 点击次数：3214