防火网
本站  
设为首页 加入收藏 网站地图   中文版 繁体 English
 
测试服务: 机车材料防火测试 | 建筑产品防火测试 | 船舶防火测试 | 飞机防火测试 | 耐火测试 | 喷射火测试 | 其他测试
   
用户名:
密码:
验证码:
   
 
主要阻燃防火认证标准
火车船舶汽车建材
 
相关测试方法 更多>>
EN ISO 9239-1:2010地
EN ISO 1182:2010
NF P 92-501
NF P 92-507
法标F级测试
法标I级测试
法国M级测试
EN ISO 1182
EN ISO 9239-1
EN 13501-1
 
首页   美国   ASTM F1788水上泄漏油现场燃烧标准导则:环境与操作依据
 

ASTM F1788水上泄漏油现场燃烧标准导则:环境与操作依据

ASTM F1788 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
ASTM F1788 水上泄漏油现场燃烧标准导则:环境与操作依据

This guide is primarily intended to aid decision-makers and spill-responders in contingency planning, spill response, and training.
This guide is not specific to either site or type of oil.

1. Scope
1.1 This guide covers the use of in-situ burning to assist in the control of oil spills on water. This guide is not applicable to in-situ burning of oil on land.
1.2 The purpose of this guide is to provide information that will enable spill responders to decide if burning will be used as part of the oil spill cleanup response.
1.3 This is a general guide only. It is assumed that conditions at the spill site have been assessed and that these conditions are suitable for the burning of oil. It is also assumed that permission to burn the oil has been obtained from appropriate regulatory authorities. Variations in the behavior of different oil types are not dealt with and may change some of the parameters noted in this guide.
1.4 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are included for information only and are not considered standard.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM F1990 Guide for In-Situ Burning of Spilled Oil: Ignition Devices
ASTM F2152 Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
Index Terms
fire-resistant booms; in-situ burning; oil-spill burning; oil-spill containment; oil-spill disposal; Booms; Fire-resistant booms; In-situ oil spill response/treatment; Oil spill control systems;

更多防火阻燃测试认证,请咨询中国防火网
电话:400-666-7290
网址:www.firete.com
邮箱:info@firete.com

...


 来源:防火网 发布时间:11/22/2013 点击次数:1600

 上一条: ASTM F1731消防和救援人员制服及其他隔热保护服装人体测量与尺寸标注标准规范

 下一条: ASTM F2230水面漏油现场燃烧的标准指南:冻结条件
 
 
网站首页 | 测试服务 | 各国标准 | 新闻资讯 | 防火材料 | 会展信息 | 认证服务 | 在线咨询 | 联系我们
Copyright © 2009-2024 Firete.com All Right Reserved 苏公网安备 32010502010088号
服务热线:025-86583475   备案号:苏ICP备10201999号-1 DIN5510-2 DIN5510 防火网博客