ASTM E603房间防火实验标准指南

ASTM E603 Standard Guide for Room Fire Experiments
ASTM E603 房间防火实验标准指南

1. Scope
1.1 This guide addresses means of conducting full-scale fire experiments that evaluate the fire-test-response characteristics of materials, products, or assemblies under actual fire conditions.
1.2 It is intended as a guide for the design of the experiment and for the use and interpretation of its results. The guide is also useful for establishing laboratory conditions that simulate a given set of fire conditions to the greatest extent possible.
1.3 This guide allows users to obtain fire-test-response characteristics of materials, products, or assemblies, which are useful data for describing or appraising their fire performance under actual fire conditions.
1.3.1 The results of experiments conducted in accordance with this guide are also useful elements for making regulatory decisions regarding fire safety requirements. The use for regulatory purposes of data obtained from experiments conducted using this guide requires that certain conditions and criteria be specified by the regulating authority.
1.4 The rationale for conducting room fire experiments in accordance with this guide is shown in 1.5-1.8
1.5 Room fire experiments are a means of generating input data for computer fire models and for providing output data with which to compare modeling results.
1.6 One of the major reasons for conducting room fire experiments is as an experimental means of assessing the potential fire hazard associated with the use of a material or product in a particular application. This should be borne in mind when designing nonstandard experiments.
1.7 A rationale for conducting room fire experiments is the case when smaller-scale fire tests inadequately represent end-use applications.
1.8 A further rationale for conducting room fire experiments is to verify the results obtained with smaller scale tests, to understand the scaling parameters for such tests.
1.9 Room fire tests can be placed into four main categories: reconstruction, simulation, research, and standardization.
This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions
This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

2. Referenced Documents (purchase separately)
ASTM Standards
ASTM D4442 Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
ASTM D4444 Test Methods for Use and Calibration of Hand-Held Moisture Meters
ASTM D5424 Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM D5537 Test Method for Heat Release, Flame Spread and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration
ASTM E176 Terminology of Fire Standards
ASTM E800 Guide for Measurement of Gases Present or Generated During Fires
ASTM E906 Test Method for Heat and Visible Smoke Release Rates for Materials and Products
ASTM E1321 Test Method for Determining Material Ignition and Flame Spread Properties
ASTM E1354 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
ASTM E1355 Guide for Evaluating the Predictive Capability of Deterministic Fire Models
ASTM E1537 Test Method for Fire Testing of Real Scale Upholstered Furniture
ASTM E1590 Test Method for Fire Testing of Mattresses
ASTM E1822 Test Method for Fire Testing of Stacked Chairs
ASTM E2067 Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
ASTM E2257 Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
UL Standards
ULSubject1040 Large Scale Open Corner Test
ICBO Standards
UniformBuildingCodeS Room Fire Test Standard for Interior of Foam Plastic Systems
FM Standard
FM4880 Large Scale Open Building Corner Test
ISO Standards
ISO13943 Fire Safety--Vocabulary
NFPA Standard
NFPA286 Standard Method of Tests for Evaluating Contribution of Wall and Ceiling Interior Finish to Room Fire Growth
Index Terms
burning characteristics; experiment design; flashover guide; full-scale test; guide; ignition; instrumentation; room fire experiment; ventilation

更多防火阻燃测试认证，请咨询中国防火网
电话：400-666-7290
网址：www.firete.com
邮箱：info@firete.com

...

 来源：防火网　发布时间：11/20/2013 点击次数：1940