IMO FTPC Part 5:表面可燃性测试

IMO FTPC Part 5:表面可燃性测试

IMO FTPC Part 5: Test for surface flammability

Field of application

Surface materials for bulkheads and ceilings and similar exposed surfaces, floor coverings舱壁、天花板和甲板表面

等级评估:

Where CFE: Critical flux at extinguishment 熄灭时临界热辐射量

       Qsb: Heat for sustained burning   持续燃烧热值

       Qt: Total heat release 热释放总值

       Qp: Peak heat release rate 热释放峰值

The test is terminated when any one of the following is applicable;

1.      The specimen fails to ignite after a 10 minute exposure

2.      Three minutes have pass since all flaming from the specimen ceased.

3.      Flaming reaches the end of the specimen or self extinguishes and thus ceases to progress along the specimen. This criterion is only used when heat release measurements are not being made.

4.      In the case of floorcoverings, the test shall be terminated after 40 minutes.

IMO MSC 61(67) FTPC – 相关测试标准

IMO FTPC Part 1: Non-combustibility test 不燃物测试

IMO FTPC Part 2: Smoke and toxicity test 烟雾毒性测试

IMO FTPC Part 4: Test for fire door control systems 防火门控制系统测试

IMO FTPC Part 5: Test for surface flammability 表面燃烧试验

IMO FTPC Part 6: Test for primary deck coverings 主要甲板覆盖物测试

IMO FTPC Part 7: Test for vertically supported textiles and films 垂直放置的纺织物料和覆膜测试

IMO FTPC Part 8: Test for upholstered furniture 软垫家具测试

IMO FTPC Part 9: Test for bedding components 床上用品测试

ISO 9705 and ISO 5660: Test for fire-restricting materials for high-speed craft 高速船舶防火材料

中国防火网免费咨询电话：400-666-7290

 来源：防火网　发布时间：7/29/2010 点击次数：4882