EN 1365系列标准为承重构件耐火试验，主要考量承重构件在火灾条件下保持承重性、隔热性、完整性。现在就跟着睿督工程师来了解建筑构件中耐火极限的定义和判定条件吧，具体请咨询南京睿督公司，咨询电话：025-8658 3475。
√ EN 1365承重构件耐火试验标准
EN 1365-1 承重构件的耐火试验 - 第1部分：墙体 EN 1365-2 承重构件的耐火试验 - 第2部分：地板和屋顶 EN 1365-3 承重构件的耐火试验 - 第3部分：梁 EN 1365-4 承重构件的耐火试验 - 第4部分：柱子 EN 1365-5 承重构件的耐火试验 - 第5部分：阳台及走道 EN 1365-6 承重构件的耐火试验 - 第6部分：楼梯
This European Standard specifies a method of testing the fire resistance of loadbearing walls. It is applicable to both internal and external walls. The fire resistance of external walls can be determined under internal or external exposure conditions.
The fire resistance performance of loadbearing walls is normally evaluated without perforations such as doors, glazing or fire resistant ducts. If it can be demonstrated that the design of the opening is such that load is not transmitted to the perforation, then the perforation need not be tested in the loaded condition. If perforations are to be included, the effects of these will need to be separately established.
This test method is not applicable to non-separating loadbearing walls which, in short widths, can be tested as columns to EN 1365-4. This European Standard is used in conjunction with EN 1363-1:199
√ EN 1365-2地板和屋顶承重耐火试验（水平承重耐火试验）
EN 1365-2 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs EN 1365-2 承重构件的耐火试验 - 第2部分：地板和屋顶
This European Standard specifies a method for determining the fire resistance of: - floor constructions, without cavities or with unventilated cavities; - roof constructions, with or without cavities (ventilated or unventilated); - floor and roof constructions incorporating glazing; with fire exposure from the underside. This European Standard is used in conjunction with EN 1363-1.
√ EN 1365-3 横梁承重耐火试验
EN 1365-3 Fire resistance tests for loadbearing elements - Part 3: Beams EN 1365-3 承重构件的耐火试验 - 第3部分：横梁
EN 1365-3规定了一种确定具有或不具有防火系统以及具有或不带有空腔的梁的耐火性的方法。本标准与EN 1363-1一起使用。
梁是地板结构的一部分，按照EN 1365-2中所述的地板结构进行测试，并接受完整性和绝缘性评估。
EN 1365-3 specifies a method for determining the fire resistance of beams with or without appliedfire protection systems and with or without cavities.This Standard is used in conjunction with EN 1363-1.
Beams which are part of a floor construction are tested with the floor construction as described in EN 1365-2 and are subject to evaluation of integrity and insulation
√ EN 1365-4 柱子承重耐火试验
EN 1365-4 Fire resistance tests for loadbearing elements - Part 4: Columns EN 1365-4 承重构件的耐火试验 - 第4部分：柱子
EN 1365-4 标准规定了柱子在所有侧面完全暴露在火中时的耐火性的方法。本标准与EN 1363-1一起使用
EN 1365-4 specifies a method for determining the fire resistance of columns when fully exposed to fire on all sides.This Standard is used in conjunction with EN 1363-1.
√ EN 1365-5 阳台及走道承重耐火试验
EN 1365-5 Fire resistance tests for loadbearing elements - Part 5: Balaconies and waklways EN 1365-5 承重构件的耐火试验 - 第5部分：阳台及走道
EN 1365-5标准规定测量阳台或走道或者有代表性的承重构件，完全暴露在火中时的耐火性的方法。
The purpose of this test is to measure the ability of a representative specimen of a balcony or walkway or a part of those to maintain its loadbearing capacity when exposed to fire according to EN 1363-1.
√ EN 1365-6 楼梯承重耐火试验
EN 1365-6 Fire resistance tests for loadbearing elements - Part 6: Stairs EN 1365-6 承重构件的耐火试验 -发第6部分：楼梯
EN 1365-6 规定了一种测定以下材料的耐火性的方法，该方法涉及承载能力和无分离功能： –从建筑物外部或内部暴露在火灾中的阳台；和 –从建筑物外部或内部暴露在火灾中的走道。 本标准与EN 1363-1一起使用。
EN 1365-6 specifies a method for determining the fire resistance, in respect with loadbearing capacity and with no separating function, of: – balconies exposed to the fire from either outside or inside the building; and – walkways exposed to the fire from either outside or inside the building. This standard is used in conjunction with EN 1363-1.
苏公网安备 32010502010088号
测试服务：
主要阻燃防火认证标准
