EAD 330087-00-0601 Systems for post-installed rebar connections with mortar 后锚固连接系统ETA认证
植筋胶出口欧盟，需满足ETA认证要求，主要测试包括：
Basic Works Requirement 1: Mechanical resistance and stability Characteristic resistance to tension load (static and quasi-static loading)
1 Resistance to steel failure (tension) 2.2.1 2 Resistance to combined pull-out and concrete failure 2.2.2 3 Resistance to concrete cone failure 2.2.3 4 Edge distance to prevent splitting under load 2.2.4 5 Robustness 2.2.5 6 Maximum setting torque moment 2.2.1.2 7 Minimum edge distance and spacing 2.2.6
Characteristic resistance to shear load (static and quasi-static loading)
8 Resistance to steel failure (shear) 9 Resistance to pry-out failure 10 Resistance to concrete edge failure 2.2.9 Displacements under short term and long term
11 Displacements under short term and long term loading 2.2.10 （0, ∞）[mm or mm/(N/mm2)] Durability
12 Durability of metal parts 2.2.11 Characteristic resistance and displacements for seismic performance categories C1 or C2 (optional) 13 Resistance to steel failure 14 Resistance to pull-out 15 Fracture elongation 16 Factor for annular gap 17 Displacements
ETA认证与CPR指令CE认证的关系
Under the CPR, harmonised technical specifications are harmonised European product standards (hENs) established by CEN/CENELEC2 or European Assessment Documents (EADs) produced by the European CPR指令认证的依据是建筑指令欧盟协调标准或欧盟评估文件（EADs）
European Organisation for Technical Approvals (EOTA) as the basis for issuing ETAs for products not covered by hENs.The harmonised technical specification for a product defines EEA-wide methods of assessing and declaring 对于没有被协调标准完全覆盖的建筑产品的认证，可以通过EOTA机构核发ETA认证证书（等同于CE认证书）。
苏公网安备 32010502010088号
测试服务：
主要阻燃防火认证标准
