防火网
本站  
设为首页 加入收藏 网站地图   中文版 繁体 English
 
测试服务: 机车材料防火测试 | 建筑产品防火测试 | 船舶防火测试 | 飞机防火测试 | 耐火测试 | 喷射火测试 | 其他测试
   
用户名:
密码:
验证码:
   
 
主要阻燃防火认证标准
火车船舶汽车建材
 
相关测试方法 更多>>
EN ISO 9239-1:2010地
EN ISO 1182:2010
NF P 92-501
NF P 92-507
法标F级测试
法标I级测试
法国M级测试
EN ISO 1182
EN ISO 9239-1
EN 13501-1
 
首页   政策法规   南京睿督邀您关注ASTM美标A2LA资质美国ELEMENT实验室测试标准
 

南京睿督邀您关注ASTM美标A2LA资质美国ELEMENT实验室测试标准

南京睿督公司公司专业从事美标防火阻燃烟毒测试十多年,对于众多美标测试认证的要求,非常了解,提供美国A2LA国家资质实验室的ELEMENT实验室的测试检测报告,咨询电话:025-86583475。

ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
ASTM B487 Test Method for Metal and Oxide Coating Thickness by Microscopical Examination of a Cross Section
ASTM C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
ASTM C271 Test Method for Density of Sandwich Core Materials
ASTM C273 Test Method for Shear Properties in Flatwise Plane of Flat Sandwich Constructions or Sandwich Cores

ASTM C297 Test Method for Tensile Strength of Flat Sandwich Constructions in Flatwise Plane
ASTM C363 Test Method for Node Tensile Strength of Honeycomb Core Materials
ASTM C364 Test Method for Edgewise Compressive Strength of Flat Sandwich Constructions
ASTM C365 Test Methods for Flatwise Compressive Strength of Sandwich Cores
ASTM C373 Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products

ASTM C393 Test Method for Flexural Properties of Flat Sandwich Constructions
ASTM C394 Standard Test Method for Shear Fatigue of Sandwich Core Materials
ASTM C1166 Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
ASTM C1275 Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Elevated Temperatures

ASTM D149 Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
ASTM D150 Test Methods for A-C Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials
ASTM D229 Rigid Sheet and Plate Materials Used for Electrical Insulation
ASTM D256 Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
ASTM D257 Test Methods for D-C Resistance or Conductance of Insulating Materials

ASTM D297 Test Method for Rubber Products – Chemical Analysis (Section 16.3)
ASTM D395 Rubber Property—Compression Set
ASTM D412 Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers- Tension
ASTM D471 Test Method for Rubber Property-Effect of Liquids (Section 15 only)
ASTM D495 Test Method for High-Voltage, Low-Current, Dry Arc-Resistance of Solid Electrical Insulation

ASTM D568 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Flexible Plastics in a Vertical Position
ASTM D570 Test Method for Water Absorption of Plastics
ASTM D575 Test Methods for Rubber Properties in Compression
ASTM D618 Conditioning of Plastics for Testing
ASTM D621-64(88) Test Methods for Deformation of Plastics Under Load (Withdrawn 1994)

ASTM D624 Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers (Die B & C)
ASTM D635 Test Method for Rate of Burning and/or Extent and Time Burning of Self-Supporting Plastics in a Horizontal Position
ASTM D638 Test Method for Tensile Properties of Plastics
ASTM D646 Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight)
ASTM D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

ASTM D695 Test Method for Compressive Properties of Rigid Plastics
ASTM D732 Test Method for Shear Strength of Plastics by Punch Tool
ASTM D747 Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D785 Rockwell Hardness of Plastics and Electrical Insulating Materials
ASTM D790 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

ASTM D792 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement (Method A)
ASTM D877 Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
ASTM D882 Test Methods for Tensile Properties of Thin Plastic Sheeting
ASTM D897 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D903 Test Method for Peel or Stripping Strength of Adhesive Bonds

ASTM D924 Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) or Electrical Insulating Liquids
ASTM D952 Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
ASTM D953 Test Method for Bearing Strength of Plastics
ASTM D991 Test Method for Rubber Property-Volume Resistivity of Electrically Conductive and Antistatic Products
ASTM D1002 Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

ASTM D1004 Test Method for Initial Tear Resistance of Plastic Film and Sheeting
ASTM D1043 Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
ASTM D1169 Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids
ASTM D1200 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D1238 Test Method for Flow Rates of Thermoplastics by Extrusion Plastometer (Method A)

ASTM D1298 Test Method for Density, Relative Density, or API Gravity of Crude
Petroleum and Liquid Petroleum Products by Hydrometer Method
ASTM D1329 Test Method for Evaluating Rubber Property-Retraction at Lower
Temperatures (TR Test)
ASTM D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)
ASTM D1414 Standard Test Methods for Rubber O-Rings
ASTM D1621 Test Method for Compressive Properties of Rigid Cellular Plastics

ASTM D1622 Test Method for Apparent Density of Rigid Cellular Plastics
ASTM D1623 Test Method for Tensile and Tensile Adhesion Properties of Rigid
Cellular Plastics
ASTM D1708 Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D1781 Test Method for Climbing Drum Peel for Adhesives
ASTM D1824 Test Method for Apparent Viscosity of Plastisols and Organosols at Low
Shear Rates

ASTM D1876 Test Method for Peel Resistance of Adhesives (T-Peel Test)
ASTM D1938 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by Single-Tear Method
ASTM D2095 Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
ASTM D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
ASTM D2240 Test Method for Rubber Property-Durometer Hardness (Shore A & D)

ASTM D2295 Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
ASTM D2344 Test Method for Apparent Interlaminar Shear Strength of Parallel Fiber Composites by Short-Beam Method
ASTM D2520 Test Method for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 ?C
ASTM D2557 Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from (-267.8 to -55) ?C or (-450 to -67) ?F
ASTM D2583 Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

ASTM D2584 Test Method for Ignition Loss of Cured Reinforced Resins
ASTM D2734 Void Content of Reinforced Plastics
ASTM D2857 Standard Practice for Dilute Solution Viscosity of Polymers
ASTM D2919 Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D3039 Test Method for Tensile Properties of Polymer Matrix Composite Materials

ASTM D3163 Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
ASTM D3164 Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
ASTM D3165 Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
ASTM D3166 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
ASTM D3167 Test Method for Floating Roller Peel Resistance of Adhesives

ASTM D3171 Test Method for Fiber Content of Resin-Matrix Composites by Matrix Digestion (Method A, B, and G)
ASTM D3330 Test Method for Peel Adhesion of Pressure-Sensitive Tape
ASTM D3359 Test Methods for Measuring Adhesion by Tape Test
ASTM D3386-002 Test Method of Coefficient of Linear Thermal Expansion of Electrical Insulating
ASTM D3410/3410M Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

ASTM D3417-992 Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)
ASTM D3418 Test Method for Transition Temperatures of Polymers by Thermal Analysis
ASTM D3433 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
ASTM D3479 Test Methods for Tension-Tension Fatigue of Oriented Fiber, Resin Matrix Composites
ASTM D3518 Practice for In-Plane Shear Stress-Strain Response of Unidirectional Polymer Matrix Composite Materials by Tensile Test of ±45 Laminate

ASTM D3528 Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
ASTM D3529 Test Method for Resin Solids Content of Epoxy-Matrix Prepreg by Matrix Dissolution
ASTM D3530 Test Method for Volatiles Content of Epoxy-Matrix Prepreg
ASTM D3531 Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
ASTM D3532 Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg

ASTM D3552 Standard Test Method for Tensile Properties of Fiber Reinforced metal Matrix Composites
ASTM D3759 Test Method for Breaking Strength and Elongation of Pressure Sensitive Tape
ASTM D3776 Standard Test Method for Mass Per Unit Area (Weight) of Fabric
ASTM D3846 Test Method for In-Plane Shear Strength of Reinforced Plastics
ASTM D3850 Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials by Thermogravimetric Method

ASTM D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
ASTM D3914 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
ASTM D3916 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
ASTM D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
ASTM D4255 In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

ASTM D4475 Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods by the Short-Beam Method
ASTM D4496 Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
ASTM D4591 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
ASTM D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
ASTM D4812 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

ASTM D5023 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure
(Three-Point Bending)
ASTM D5024 Test Method for Plastics: Dynamic Mechanical Properties: In Compression
ASTM D5026 Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D5035 Breaking Force and Elongation of Textile Fabrics (Strip Method)
ASTM D5083 Tensile Properties of Reinforced Thermosetting Plastics Using Straight Sided Specimens

ASTM D5229 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
ASTM D5379 Test Method for Shear Properties of Composite Materials by the V- Notched Beam Method
ASTM D5420 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
ASTM D5467 Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
ASTM D5528 Mode I Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composite

ASTM D5628 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
ASTM D5656 Test Method for Thick Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
ASTM D5766 Open Hole Tensile Strength of Polymer Matrix Composite Laminates
ASTM D5868 Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
ASTM D5961 Test Method for Bearing Response of Polymer Matrix Composite Laminates

ASTM D6110 Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
ASTM D6264 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
ASTM D6267 Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
ASTM D6272 Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
ASTM D6413 Flame Resistance of Textiles (Vertical Test)

ASTM D6415 Test Method for Measuring the Curved Beam Strength of a Fiber Reinforced Polymer Composite
ASTM D6484 Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
ASTM D6641 Test Method for Determining the Compressive Properties of Polymer Matrix Composite Laminate Using a Combined Loading Compression (CLC) Test Fixture
ASTM D6671 Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
ASTM D6742 Filled Hole Tension and Compression Testing of Polymer Matrix Composites

ASTM D6862 90 Degree Peel Resistance of Adhesives
ASTM D6869 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
ASTM D7028 Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
ASTM D7078 Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
ASTM D7136 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

ASTM D7137 Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
ASTM D7248 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
ASTM D7249 Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
ASTM D7250 Practice for Determining Sandwich Beam Flexural and Shear Stiffness
ASTM D7264 Test Method for Flexural Properties of Polymer Matrix Composite
Materials

ASTM D7291 Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
ASTM D7332 Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
ASTM D7426 Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound
ASTM D7565 Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
ASTM D7615/ASTM D7615M Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates

ASTM D7616 Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
ASTM D7766 Damage Resistance Testing of Sandwich Constructions
ASTM D7905 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
ASTM D7956 Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
ASTM E3 Practice for Preparation of Metallographic Specimens

ASTM E8 Standard Test Methods for Tension Testing of Metallic Materials
ASTM E18 Rockwell Hardness of Metallic Materials
ASTM E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
ASTM E662 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
ASTM E831 Test method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

ASTM E990 Standard Specifications for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels (Except Water Migration)
ASTM E1131 Test Method for Compositional Analysis by Thermogravimetry
ASTM E1252 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
ASTM E1269 Determining Specific Heat Capacity by DSC
ASTM E1356 Test Method for Glass Transition Temperatures by Differential Scanning Calorimetry or Differential Thermal Analysis (DSC Only)

ASTM E1545 Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
ASTM E1640 Test Method for Assignment of the Glass Transition Temperature by DMA
ASTM E1952 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
ASTM E2004 Test Method for Facing Cleavage of Sandwich Panels
ASTM E2160 Standard Test Method for Heat Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry

ASTM F814-84b2 Test Method for Specific Optical Density of Smoke Generated by Solid Materials for Aerospace Applications (Withdrawn 1995)
ASTM G154 Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
BS EN 2564 Aerospace Series-Carbon Fibre Laminates – Determination of Fibre, Resin, and Void Contents
BS EN 6032 Aerospace Series – Fibre Reinforced Plastics – Test Method- Determination of the Glass Transition Temperatures
BS EN 6033 Aerospace Series – Carbon Fibre Reinforced Plastics – Test Method – Determination of Interlaminar Fracture Toughness Energy – Model I – GIC

BS EN 6034 Aerospace Series - Carbon Fibre Reinforced Plastics – Test Method – Determination of Interlaminar Fracture Toughness Energy – Model II – GIIC
BS EN 6040 Aerospace Series – Non-Metallic Materials – Test Method – Analysis of Thermoset Systems by High Performance Liquid Chromatography (HPLC) – Qualitative Only
ISO 178 Plastics – Determination of Flexural Properties
ISO 179 Plastics – Determination of Charpy Impact Properties – Part 1: Non-instrumental Impact Test
ISO 527 Plastics – Determination of Tensile Properties

ISO 760 Determination of Water – Karl Fischer Method
ISO 844 Rigid Cellular Plastics – Determination of Compression Properties
ISO 1817 Rubber, Vulcanized or Thermoplastic – Determination of the Effect of Liquids
ISO 1926 Rigid Cellular Plastics – Determination of Tensile Properties

ISO 14125 Fibre-Reinforced Plastic Composites – Determination of the Flexural Properties
ISO 14126 Fibre-Reinforced Plastic Composites – Determination of Compressive Properties in the In-Plane Direction
ISO 14129 Fibre-Reinforced Plastic Composites – Determination of the In-Plane Shear Strain Response, including the In-Plane Shear Modulus and Strength by the ±45 Tension Test Method
DOT FMVSS 302 Department of Transportation Motor Vehicle Safety Standard Flammability of Interior Materials
FAR 25.853 Airworthiness Standards: Transport Category Airplanes, Fire Protection, Compartment Interiors, Appendix F, Part I, IV, and V

Boeing:
BSS 7230 Determination of Flammability Properties of Aircraft Materials
BSS 7238 Test Method for Smoke Generation by Materials on Combustion
BSS 7239 Test Method for Toxic Gas Generation by Materials on Combustion
BSS 7322 Boeing Specification Support Standard, Ohio State University Calorimeter Heat Release,

Airbus:
AITM 2.0002 Resistance of Materials When Tested According to the 12 s or 60 s Vertical Bunsen Burner Test
AITM 2.0003 Flammability of Non-metallic Materials, - Small Burner Test, Horizontal
AITM 2.0004 Flammability of Non-metallic Materials, - Small Burner Test, 45 degrees
AITM 2.0005 Flammability of Non-metallic Materials, - Small Burner Test, 60 degrees
AITM 2.0006 Determination of Heat Release and Heat Release Rate of Aircraft Materials

AITM 2.0007 Determination of Specific Optical Smoke Density of Component Parts or Sub-Assemblies of Aircraft Interior
AITM 2.0008 Determination of Specific Optical Smoke Density of Wire/Cable Insulation
AITM 2.0038 Flammability of Heat Shrinkable Tubing’s, - Small Burner Test, 60 degrees
AITM 3.0005 Determination of Specific Gas Components of Smoke Generated by Component Parts or Sub-Assemblies of Aircraft Interior

Military Standards:
MIL-STD-810 Environmental Engineering Considerations and Laboratory Tests:
Method 501 High Temperature
Method 502 Low Temperature
Method 507 Humidity
MIL-STD-202 Test Methods for Electronic and Electrical Component Parts:
Method 103 Humidity (Steady State)
Method 104 Immersion (Method A)
Method 108 Life (at Elevated Ambient Temperature)
Method 301 Dielectric Withstanding Voltage
Method 302 Insulation Resistance

Method 303 DC Resistance
SACMA (Suppliers of Advanced Composite Materials Association):
SRM 1-94 Compressive Properties of Oriented Fiber-Resin Composites
SRM 2-94 Compression After Impact Properties of Oriented Fiber-Resin Composites
SRM 3-94 Open-Hole Compression Properties of Oriented Fiber-Resin Composites
SRM 4-94 Tensile Properties of Oriented Fiber-Resin Composites
SRM 2R-94 Compression After Impact Properties of Oriented Fiber-Resin Composites

SRM 5-94 Open-Hole Tensile Properties of Fiber-Resin Composites
SRM 6-94 Compressive Properties of Oriented Cross-Plied Fiber-Resin Composites
SRM 7-94 In-Plane Shear Stress-Strain Properties of Oriented Fiber-Resin Composites
SRM 8-94 Short Beam Shear Strength of Oriented Fiber-Resin Composites
SRM 9-94 Tensile Properties of Oriented Cross-Plied Fiber-Resin Composit

SRM 10R-94 Fiber Volume, Percent Resin Volume and Calculated Average Cured Ply Thickness of Plied Laminates
SRM 11R-94 Environmental Conditioning of Composite Test Laminates
SRM 18R-94 Glass Transition Temperature (Tg) Determination By DMA
SRM 21R-94 Fluid Resistance Evaluating of Composite Materials
SRM 22R-94 Determining the Resin Flow of Preimpregnated “B” Staged Material

SRM 23R-94 Determination of Resin Content and Fiber Areal Weight of Thermoset Prepreg with Destructive Techniques
SRM 25R-94 Onset Temperature and Peak Temperature for Composite Resin Systems Using Differential Scanning Calorimetry (DSC)

Sikorsky
SS9152/PP101 Determination of Glass Transition Temperature by DMA, Single Cantilever Method
SAE (Society of Automotive Engineers)
SAE J2253 Test Procedures for Automotive Structural Composite Materials (Formerly ACCM-T-02)
Section 8.2 Specific Gravity
Section 8.3 – 8.5 Resin / Filler / Void Content

Section 9.2 DMA
Section 10 Tensile Testing
Section 11 Compressive Testing
Section 12 Shear Testing
ASTM B987 Standard Specification for Carbon Fiber Composite Core (CFCC/TS) for use in Overhead Electrical Conductors

ASTM D876 Electrical Insulation
ASTM D1414 Test Methods for Rubber O-Rings
ASTM D1675 Standard Test Methods for Polyetrafluothylene Tubing
ASTM D4745 Standard Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
ASTM D4762 Standard Guide for Testing Polymer Matrix Composite Materials

ABD 0031 Fireworthiness Requirements Pressurized Section of Fuselage
BOEING D6-51377 Airplane Fire Worthiness Design Criteria-Pressurized Compartments
IPC-CC-830 Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies
MIL-I-46058 General Specification for Insulating Compound, Electrical
(For Coating Printed Circuit Assemblies) (Except Fungus)
MMM-A-132 Federal Specification for Adhesives, Heat Resistant, Airframe Structural, Metal-to-Metal

NASA 1092 Standard Tests for Toughened Resin Composites
NASA 1142 NASA / Aircraft Industry Standard Specification for Graphite Fiber-Toughened Thermoset Composite Materials
ASTM C1275 Standard Test Method for Monotonic Tensille Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
ASTM C1337 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevate Temperatures
ASTM C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Elevated Temperatures

ASTM C1360 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
ASTM C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advance Ceramics at Ambient Temperature
ASTM D3039 Test Method for Tensile Properties of Polymer Matrix Composite Materials

我们同时还提供美标的各种防火测试
NFPA130美国防火测试 
http://www.fire-test.com/teststandard/usa/3239.html
ASTM E162表面燃烧性能测试 
http://www.fire-test.com/teststandard/usa/3346.html
ASTM E662烟密度测试        
http://www.fire-test.com/teststandard/usa/3347.html
ASTM E648地板临界热量测试 
http://www.fire-test.com/teststandard/usa/3348.html
ASTM C1166弹性材料测试        
http://www.fire-test.com/teststandard/usa/3341.html
ASTM E84表面燃烧性能测试 
http://www.fire-test.com/teststandard/usa/3343.html
BSS 7239毒性测试   
http://www.fire-test.com/teststandard/usa/3351.html 
Bombardier SMP 800-C毒性测试 
http://www.fire-test.com/teststandard/usa/3349.html
NFPA285防火等级测试
http://www.fire-test.com/teststandard/usa/7264.html

南京睿督公司免费咨询电话:025-86583475  400-603-6575
网址:
www.fire-test.com    www.fire-test.cn
邮箱:info@fire-test.com   fanghuo@vip.163.com


 来源:防火网 发布时间:2/1/2021 点击次数:1292

 上一条: 酚醛绝缘板英国Warringtonfire实验室Class 0防火等级证书

 下一条: EN 45545-2:2020欧盟铁路车辆的防火烟毒新标准
 
 
网站首页 | 测试服务 | 各国标准 | 新闻资讯 | 防火材料 | 会展信息 | 认证服务 | 在线咨询 | 联系我们
Copyright © 2009-2024 Firete.com All Right Reserved 苏公网安备 32010502010088号
服务热线:025-86583475   备案号:苏ICP备10201999号-1 DIN5510-2 DIN5510 防火网博客