Home station  
Set as homepage Add to favorites    中文版 繁体 English
 
Testing to: Rolling Fire testing | Building Fire testing | Marine material | Aircraft material | Fire Resistance | Jet Fire | Other
Company logo
Contact Information
Contact:Ms Li
Department:
Post:
Tel:025-86583035
Mobile:
Fax:
Email: info@firete.com
Add: No.118 Middle JiangdongRoad,Nanjing,Jiangsu,210012,China
Website: http://www.firete.com
Enterprise basic information
Type:
Business:
Number of employees:保密
 
Home About Products Business
 Location:Home > Firete.com > BS 6853 Annex D/smoke density/BS 6853
BS 6853 Annex D/smoke density/BS 6853
Release Date:2/23/2011  Hits:1619

BS 6853 Annex D/smoke density/BS 6853

BS 6853 Annex D: Methods for measuring smoke density
 
The smoke density measurement taken from a material under fire conditions gives an indication of the visibility

through the smoke, this is important as reduced visibility in a real fire situation makes it more difficult to

escape from a fire hence increasing the threat to human life from the toxic gases, flames and heat.

There are five different test methods which can be utilized to determine the smoke density produced from

materials to be placed on passenger carrying trains in the UK.

The five different methods are as follows:
 
 BS 6853 Annex D.8.3 – small scale test method
 BS 6853 Annex D.8.4 – panel test method
 BS 6853 Annex D.8.5 – seat test method
 BS 6853 Annex D.8.6 – floor test method
 BS 6853 Annex D.8.7 – cable test method
 
BS 6853 Annex D.8.3 is utilized for minor use materials (Tables 7 and 8 of BS 6853: 1999) and textiles (Table

11 of BS 6853: 1999).

BS 6853 Annex D.8.4 is utilized for interior and exterior vertical surfaces and horizontal prone surfaces

(Tables 2, 3, 5 and 6 of BS 6853: 1999) and seat shell (table 10 of BS6853: 1999).
 
BS 6853 Annex D.8.5 is utilized for seats (Tables 9 of BS6853: 1999).
BS 6853 Annex D.8.6 is utilized for interior and exterior horizontal supine surfaces (Tables 1 and 4 of BS

6853:1999) and mattresses (table 12 of BS 6853: 1999).
 
BS 6853 Annex D.8.7 is utilized for interior and exterior cables (Tables 13 and 14 of BS 6853: 1999).

The test is performed inside a chamber measuring 3 metres by 3 metres by 3 metres and the test is sometimes

referred to as the three metres cube test. The test duration is 40 minutes.

Application BS 6853 Annex D Fire testing materials
Rubber product、rubber seal
Ceiling covering
Walling covering
Textile、curtain、adumbral product、Non-woven fabrics
Seat shell、seat trim
Flooring covering
Foam material、sponge、melamine foam
Paint、adhesives、pigment、varnish
FRP、FPP composite materials、SMC sheet
Adhesives、glue
Window、door and framework
Small parts
Connector、connected equipment
Pipe、cooling pipe、heat pipe
Other materials

Tel: 400-666-7290 4006667290
Website: www.firete.com
E-mail: info@firete.com

 
Home | Fire Test & Certification | Standard | News | Product | Exhibition | Flame retardant | On-line consultation | Contact us
Copyright © 2008-2024 Firete.com All Right Reserved
TEL:(+86)-25-8658 3475