Home station  
Set as homepage Add to favorites    中文版 繁体 English
 
Testing to: Rolling Fire testing | Building Fire testing | Marine material | Aircraft material | Fire Resistance | Jet Fire | Other
Company logo
Contact Information
Contact:Ms Li
Department:
Post:
Tel:025-86583035
Mobile:
Fax:
Email: info@firete.com
Add: No.118 Middle JiangdongRoad,Nanjing,Jiangsu,210012,China
Website: http://www.firete.com
Enterprise basic information
Type:
Business:
Number of employees:保密
 
Home About Products Business
 Location:Home > Firete.com > Cable testing for EN45545-2:2010/EN 50268-2
Cable testing for EN45545-2:2010/EN 50268-2
Release Date:2/23/2011  Hits:1291

EN 45545-2 Railway applications-Fire protection on railway vehicles Part 2: Requirements for fire behaviour of materials and components.

EN 45545-2 according to the product end-use, divided into R1-R26 level, R14-Interior cable, R15-Exterior cable.

As the cable flame spread and burning rate of destruction of the length of the combustion smoke density (light penetration) and the burning of hazardous toxic gas escape on the staff of life play a very important influence. In general, testing cables through these areas to assess.

Cable testing standard for EN45545-2:2010

BS EN 50266-2-4: Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C (cable diameter ≥12mm)

BS EN 50266-2-5: Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category D (cable diameter <12mm)

EN 50306 Section 9.1.1: Railway applications-Railway rolling stock cables having special fire performance-thin wall (6mm<cable diameter<12mm)

EN 50306 Section 9.1.2: Railway applications-Railway rolling stock cables having special fire performance-thin wall (cable diameter≤6mm)

DIN EN 60332-1-2: DIN EN 60332-1-2: Tests on electric and optical fibre cables under fire conditions—Part 1-2: Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 KW pre-mixed flame and is for general use

EN 61034-2: smoke density

EN 50268-2: smoke density

NF X 70-100 600℃ CIT cable: toxicity testing

、、、、、、

CEN/TS EN45545 
CEN/TS EN45545-Fire protection of railway vehicles
CEN/TS EN45545-1 Part1:Gerneral
CEN/TS EN45545-2 Part2:Requirements for fire behaviour of materials and components
CEN/TS EN45545-3 Part3:Fire resistance  requirement for  fire barriers and partitions
CEN/TS EN45545-5 Part5:Fire safety requirements for electrical equipment including that of trolley buses, track guided and magnetic levitation vehicles
CEN/TS EN45545-6 Part 6:Fire control and management system
CEN/TS EN45545-7 Part7:Fire safety requirements for flammable liquid and flammable gas installations

website: www.firete.com
Tel: 400-666-7290
E-mail: info@firete.com

 
Home | Fire Test & Certification | Standard | News | Product | Exhibition | Flame retardant | On-line consultation | Contact us
Copyright © 2008-2024 Firete.com All Right Reserved
TEL:(+86)-25-8658 3475