Home station  
Set as homepage Add to favorites    中文版 繁体 English
 
Testing to: Rolling Fire testing | Building Fire testing | Marine material | Aircraft material | Fire Resistance | Jet Fire | Other
Company logo
Contact Information
Contact:Ms Li
Department:
Post:
Tel:025-86583035
Mobile:
Fax:
Email: info@firete.com
Add: No.118 Middle JiangdongRoad,Nanjing,Jiangsu,210012,China
Website: http://www.firete.com
Enterprise basic information
Type:
Business:
Number of employees:保密
 
Home About Products Business
 Location:Home > Firete.com > Cable testing for DIN5510-2:2009/DIN EN 50266-2-4
Cable testing for DIN5510-2:2009/DIN EN 50266-2-4
Release Date:2/23/2011  Hits:1329

DIN 5510-2: Preventive fire protection in railway vehicles; Part 2: Fire behaviour and fire side effects of materials and parts, classification, requirement and test methods.

As the cable flame spread and burning rate of destruction of the length of the combustion smoke density (light penetration) and the burning of hazardous toxic gas escape on the staff of life play a very important influence. In general, testing cables through these areas to assess。

Cable testing standard for DIN5510-2

BS EN 50266-2-4: Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category C (cable diameter ≥12mm)

BS EN 50266-2-5: Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Procedures - Category D (cable diameter <12mm)

DIN EN 60332-1-2: Tests on electric and optical fibre cables under fire conditions—Part 1-2:Test for vertical flame propagation for a single insulated wire or cable—Procedure for 1 KW pre-mixed flame and is for general use,

DIN EN 50305:Railway applications-Railway rolling stock cables having special fire performance-Test methods

DIN EN 61034-2: smoke density

DIN EN 5659-2: FED(tzul)Toxicity testing, requirement FED(tzul)≤1

DIN EN 50305 Section 9.2:Toxicity testing, requirement FED(tzul)≤1

Other standard:

DIN 5510-1:1988 Preventive fire protection in railway vehicles; levels of protection, fire preventive measures and certification

DIN 5510-2:2009 Preventive fire protection in railway vehicles; Part 2: Fire behaviour and fire side effects of materials and parts- Classification, requirements and test methods.

DIN 5510-4:1988 Preventive fire protection in railway vehicles; Vehicle design; safety requirements

DIN 5510-5:1988 Preventive fire protection in railway vehicles; electrical equipment; safety requirements

DIN 5510-6: Preventive fire protection in railway vehicles; auxiliary measures emergency brake operating function; information systems. fire alarms. fire fighting equipment; safety requirements

website: www.firete.com
Tel: 400-666-7290
E-mail: info@firete.com

 
Home | Fire Test & Certification | Standard | News | Product | Exhibition | Flame retardant | On-line consultation | Contact us
Copyright © 2008-2024 Firete.com All Right Reserved
TEL:(+86)-25-8658 3475