ASTM C447-15 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
ASTM C447-15 隔热材料最高使用温度估算规程
1. ASTM C447标准适用范围
1.1 This practice covers estimation of the maximum use temperature of thermal insulation including loose fill, blanket, block, board, and preformed pipe insulation. It is based upon selected performance criteria, and characterization of product properties during and after use conditions.
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
2. ASTM C447参考标准
ASTM C165 Test Method for Measuring Compressive Properties of Thermal Insulations
ASTM C167 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
ASTM C168 Terminology Relating to Thermal Insulation
ASTM C177 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
ASTM C203 Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
ASTM C302 Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
ASTM C303 Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
ASTM C335 Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
ASTM C411 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
ASTM C421 Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
ASTM C446 Test Method for Breaking Load and Calculated Modulus of Rupture of Preformed Insulation for Pipes
ASTM C518 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
ASTM D1621 Test Method for Compressive Properties of Rigid Cellular Plastics
ASTM D1622 Test Method for Apparent Density of Rigid Cellular Plastics
我们同时还提供英国BS6853、德国DIN5510、欧盟EN45545、法国NFF16-101/NFF16-102、美标NFPA130、意大利SINAL资质的测试，新加坡SAC-SINGLAS认证等
英国BS6853测试 http://www.firete.com/fire_standard/railway/163.html
德国DIN5510-2测试 http://www.firete.com/fire_standard/railway/535.html
法国NFF16-101测试 http://www.firete.com/fire_standard/railway/164.html
美国NFPA130测试 http://www.firete.com/fire_standard/railway/166.html
EN 45545-2-2013欧盟最新标准 http://www.firete.com/fire_standard/railway/167.html
中国防火网全国免费咨询电话：400-666-7290 025-8658 3475
网址：www.firete.com
邮箱：info@firete.com
...