ASTM C547 Standard Specification for Mineral Fiber Pipe Insulation
ASTM C547 预制矿物纤维管形绝热材料标准规范
ASTM C547标准适用范围
1.1 This specification covers mineral fiber insulation produced to form hollow cylinders for standard pipe and tubing sizes. The mineral fiber pipe insulation may be molded or precision v-grooved, with one or more walls split longitudinally for use on pipe temperatures up to 1400°F (760°C).
...ASTM C534/C534M 片状和管状预制韧性弹性的蜂窝状绝热材料的标准规范
ASTM C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
ASTM C534/C534M标准适用范围
1.1 This specification covers preformed flexible elastomeric cellular thermal insulation in sheet and tubular form. Grade 1 covers materials to be used on commercial or industrial systems with operating temperatures from -183 to 104°C [-297 to 220°F], Grade 2 covers material used on industrial systems with operating temperatures from -183 to 175°C [-297 to 350°F], and Grade 3 covers material used on industrial systems with operating temperatures from -183 to 120°C [-297 to 250°F] where halogens are not permitted.
...ASTM C209-2007 纤维素纤维绝热板的试验方法
ASTM C209-2007 Standard Test Methods for Cellulosic Fiber Insulating Board
ASTM C209标准适用范围
1.1 These test methods cover those insulation products in specified Specification ASTM C208. The requirements for the products' physical properties are specified in Specification ASTM C208. The methods for the general insulation products' physical properties are given as follows:
南京睿督公司提供专业权威的第三方机构的EN4589-2极限氧指数测试报告。极限氧指数是指材料在氧和氮混合气体中当刚能支撑其燃烧时氧的体积分数浓度。氧指数高表示材料不易燃烧，氧指数低表示材料容易燃烧。EN4589-2标准是常用极限氧指数测试标准之一。EN ISO 4589-2塑料-用氧指数法测定燃烧行为-第2部分:室温测试。更多关于EN4589-2极限氧指数LOI值测试的详细内容，请咨询南京睿督公司，咨询电话：400-603-6575。
EN4589-2: Plastics-Determination of burning behaviour by oxygen index –Part 2: Ambient-temperature test
...
法国建筑材料及机车材料的防火M级根据NFP92-507标准进行评估，材料的防火等级划分为M0(M0/M1/M2/M3/M4)这五个等级。阻燃M0级为不燃等级，阻燃M1级为难燃等级，阻燃M2级为难易燃等级，阻燃M3级为可燃等级，阻燃M4级等级为易燃等级。南京睿督公司携手Cofrac资质法国国家实验室为您提供法标M1级测试报告，南京睿督公司咨询电话：025-8658 3475。
NFP92-507的M等级测试，根据产品的性质及厚度，其M等级的测试方法也不同，所有厚度的硬性材料及厚度超过5mm的软性材料的M等级测试根据NFP92-501标准进行测试；厚度不超过5mm的软性材料的M等级测试根据NFP92-503标准进行测试。
...EN50575是什么标准？EN50575标准是建筑用电缆CE认证协调标准。电线电缆根据EN50575标准进行欧盟强制性CE认证。我司南京睿督公司为欧盟公告号授权合作机构，现与大家分享EN50575标准的详细内容。咨询电话：025-8658 3475。
EN 50575:2014 Power, control and communication cables. Cables for general applications in construction works subject to reaction to fire requirements.
...
EN13501-1 B级(又称为EN13501欧标防火等级B级)，对于许多公共场所防火要求都必须达到EN13501-1欧标B级或者以上防火等级。南京睿督公司与您分享欧盟防火标准EN13501-1的B级测试标准及测试要求。南京睿督公司为欧盟公告号实验室的授权合作机构，咨询电话：025-8658 3475。
EN 13501-1:2007+A1:2009: Fire classification of construction products and building elements –Part 1: Classification using date form reaction to fire tests.
...
DIN5510-2标准是铁路车辆防止燃烧－第2部分：材料和构件的燃烧特性和燃烧并发现象，分类，要求和测试方法。DIN5510标准要求动车组、高铁、地铁等轨道车辆采用防火阻燃、低烟低毒性能的材料，以减少或者避免火灾的发生及扩大。由于地铁车辆材料最终用途不同，其DIN5510测试方法也完全不同。我司南京睿督与您分享一般材料及地面材料DIN5510测试项目及标准。咨询电话：025-8658 3475。
一般材料DIN5510-2测试项目、标准及要求
1. 阻燃防火等级分类： S2-S5（S2/S3/S4/S5），根据DIN54837标准进行测试。
...
ASTM D2485-91(2013) Standard Test Methods for Evaluating Coatings For High Temperature Service
ASTM D2485-91(2013) 评定高温设备用覆层的试验方法
1. ASTM D2485-91(2013)标准适用范围：
1.1 These test methods cover the evaluation of the heat-resistant properties of coatings designed to protect steel surfaces exposed to elevated temperatures during their service life. Two test methods are described as follows:
...ASTM C871-2011 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride,Fluoride,Silicate,and Sodium Ions
ASTM C871-2011 可滤去氯化物、氟化物、硅酸盐及钠离子的绝热材料化学分析的试验方法。
ASTM C871-2011标准适用范围：
1.1 These test methods cover laboratory procedures for the determination of water-leachable chloride, fluoride, silicate, and sodium ions in thermal insulation materials in the parts per million range.
