防火网
本站  
设为首页 加入收藏 网站地图   中文版 繁体 English
 
测试服务: 机车材料防火测试 | 建筑产品防火测试 | 船舶防火测试 | 飞机防火测试 | 耐火测试 | 喷射火测试 | 其他测试
   
用户名:
密码:
验证码:
   
 
主要阻燃防火认证标准
火车船舶汽车建材
 
相关测试方法 更多>>
EN ISO 9239-1:2010地
EN ISO 1182:2010
NF P 92-501
NF P 92-507
法标F级测试
法标I级测试
法国M级测试
EN ISO 1182
EN ISO 9239-1
EN 13501-1
 
首页   政策法规   铰链合页欧盟CE认证 EN1935:2002(EN1935 Grade11欧盟公告号CE认证)
 

铰链合页欧盟CE认证 EN1935:2002(EN1935 Grade11欧盟公告号CE认证)

建筑五金件-门窗铰链合页CE Marking(欧盟强制CE认证),需要根据EN1935:2002标准来进行CE认证,铰链的质量好坏直接关系到家具与门的使用。南京睿督公司为欧盟公告号实验室国内授权合作机构,专业从事建筑产品CE认证十多年,更多关于N1935 Grade11欧盟公告号CE认证请咨询南京睿督公司,咨询电话:025-8658 3475。

EN1935:2002南京睿督公司详细标准解读:
Initial friction torque measurements 初始摩擦扭矩测量
Load-Deformation Test 静载变形测试
Overload Test 过载测试
Shear Strength Test 剪切强度测试
Durability Test 疲劳测试 
Corrosion Resistance Test 腐蚀抗性测试
Hinges for use on fire-resistance and/or smoke-control doors 用于防火或烟控门上的铰链附加测试
Hinges for use on burglar-resistance doors 用于防盗门上的铰链附加测试

EN1935:2002 This European standard specifies requirements for single-axis hinges for windows and doors opening in one direction only, whose rotation axis is no more than 30 mm from the face of the sash or door. It covers both fixed pin and lift-off hinges, and contains additional requirements for hinges intended for use on fire doors.

BS EN 1935:2002 classifies door furniture by using an 8-digit coding system. Each digit refers to a particular feature of the product measured against the standard’s performance requirements.

EN1935:2002 Digit 1 – Category of use
Four categories of use are identified:
Grade 1: light duty
Grade 2: medium duty
Grade 3: heavy duty
Grade 4: severe duty

EN1935:2002 Digit 2 – Durability
Three grades are identified for single-axis hinges manufactured to this European standard:
Grade 3: 10,000 test cycles, for light duty hinges on windows only
Grade 4: 25,000 test cycles, for light duty hinges on windows and doors
Grade 7: 200,000 test cycles, for medium, heavy and severe duty hinges on doors only

EN1935:2002 Digit 3 – Test door mass
Eight door mass grades related to single-axis hinges are identified in this European standard as shown in table below.

EN1935:2002 Digit 4 – Suitability for fire/smoke door use
Two grades of suitability are identified for single-axis hinges:
Grade 0: not suitable for fire/smoke resistant door assemblies
Grade 1: suitable for fire/smoke resistant door assemblies subject to satisfactory assessment of the contribution of the single axis hinge to the fire resistance of the specified fire/smoke door assemblies.

EN1935:2002 Digit 5 – Safety
Single-axis hinges are required to satisfy the essential requirements of safety in use. Therefore, only grade 1 is identified.

EN1935:2002 Digit 6 – Corrosion resistance
Five grades of corrosion resistance are identified in accordance with BS EN 1670:2007
Grade 0: no defined corrosion resistance
Grade 1: mild resistance
Grade 2: moderate resistance
Grade 3: high resistance
Grade 4: very high resistance

EN1935:2002 Digit 7 – Security
Two grades of security are identified for single-axis hinges:
Grade 0: not suitable for use on burglar-resistant door assemblies
Grade 1: suitable for applications requiring a degree of security. Annex C of this European standard details the hinge grade to use for the level of security required.

EN1935:2002 Digit 8 – Hinge grade
Fourteen grades are identified in this European standard and are detailed in table 2 below. The full classification is shown in the standard.

从2013年7月1日起,欧盟颁布的建筑产品CPR法规(Construction Product Regulation简称305/2011/EU-CPR法规)已全面取代原来的建筑产品CPD指令(Construction Product Directive简称CPD指令),欧盟305/2011/EU-CPR法规将对建筑产品CE认证的要求更加严格。要求铰链合页CE认证必须由欧盟公告号机构测试并发证。南京睿督公司为欧盟公告号机构NB1301的授权机构。能为您提供专业权威的铰链合页CE认证证书及相关服务。咨询电话:025-8658 3475。

相关阅读:
CPR法规
http://www.hksmartps.com/ce/cpr/   
建材CE认证
http://www.hksmartps.com/ce/   

南京睿督公司专业从事建材欧盟CE认证十多年,已协助国内众多建材厂家成功取得欧盟公告号颁发的建材CE认证证书,更多关于EN1935 Grade11欧盟公告号CE认证具体认证流程及注意事项,请咨询南京睿督公司

南京睿督公司免费咨询电话:025-8658 3475   400-603-6575
网址:
www.hksmartps.com   www.fire-test.cn  
Email:info@hksmartps.com


 来源:防火网 发布时间:4/13/2021 点击次数:1345

 上一条: 欧盟ETA认证标准-2020年新增EAD标准

 下一条: GB/T 24480及GB/T 27903电梯层门耐火测试
 
 
网站首页 | 测试服务 | 各国标准 | 新闻资讯 | 防火材料 | 会展信息 | 认证服务 | 在线咨询 | 联系我们
Copyright © 2009-2024 Firete.com All Right Reserved 苏公网安备 32010502010088号
服务热线:025-86583475   备案号:苏ICP备10201999号-1 DIN5510-2 DIN5510 防火网博客